Zippered Panelled Jacket with Stand Collar

CUTTER'S MUST

• From main fabric:
• 1. FRONT PANEL YOKE – QTY 2
• 2. Shaped INSERT – QTY 2
• 3. Center FRONT PANEL – QTY 2
• 4. SIDE PANEL (FRONT) – QTY 2
• 5. FRONT PANEL Waistband – QTY 2
• 6. BACK PANEL YOKE – QTY 1
• 7. Shaped INSERT (BACK) – QTY 2
• 8. SIDE PANEL (BACK) – QTY 2
• 9. Center BACK PANEL – QTY 2
• 10. BACK PANEL Waistband – QTY 2
• 11. COLLAR Stand – QTY 2
• 12. FACING – QTY 2
• 13. Lower FRONT PANEL Waistband – QTY 2
• 14. Upper SLEEVE – QTY 2
• 15. Lower SLEEVE – QTY 2
• 16. SLEEVE CUFF – QTY 4
• FROM FUSIBLE INTERFACING: FACING, COLLAR stand, CUFF, BACK PANEL waistband, and lower waistband.

Sewing Instructions

1. Fuse FUSIBLE INTERFACING to the FACING, COLLAR stand, CUFF, BACK PANEL waistband, and lower waistband.
2. Place COLLAR stand pieces right sides together and stitch along the outer contour up to the NOTCH. Trim and turn out the COLLAR stand corners. Press the COLLAR stand.
3. Attach the FRONT SIDE PANEL to the center FRONT PANEL. Overcast and press the seam allowances towards the center FRONT PANEL. Attach the shaped insert to the FRONT PANEL. Overcast the seam and press towards the insert. Topstitch 0.5 cm from the seams attaching the FRONT SIDE PANEL and the shaped insert.
4. Attach the BACK SIDE PANEL to the center BACK PANEL. Overcast and press the seam allowances towards the center BACK PANEL. Attach the shaped BACK PANEL piece to the BACK PANEL. Overcast the seam and press towards the insert. Topstitch 0.5 cm from the seams attaching the BACK SIDE PANEL and the shaped insert.
5. Attach the yoke to the FRONT PANEL and overcast. Overcast and press the seam allowances towards the yoke. Topstitch 0.5 cm from the yoke attachment seam.
6. Stitch the center back seam. Overcast and press the seam allowances towards the right BACK PANEL. Topstitch 0.5 cm from the seam.
7. Attach the yoke to the BACK PANEL. Overcast and press the seam allowances towards the yoke. Topstitch 0.5 cm from the yoke attachment seam.
8. Attach the waistband to the FRONT PANEL and press the seam allowances towards the waistband. Attach the waistband to the BACK PANEL and press the seam allowances towards the waistband.
9. Stitch and press open the side seams of the lower FRONT PANEL and BACK PANEL waistbands. Overcast the upper edge of the waistband.
10. Place FRONT PANELS right sides together and align the edges, matching the yokes, measure the length of the front edges. Attach the ZIPPER to the edge of the front opening. Fold and press the edges of the front opening in the ZIPPER area.
11. Overcast the outer edge of the FACING. Place the FACING on the right side of the FRONT PANEL, right side down, and stitch along the front opening line. Stitching is done from the FRONT PANEL side. Turn the front openings to the right side, straighten the seams, and press.
12. Stitch and overcast the shoulder and side seams. Press the shoulder and side seams towards the BACK PANEL.
13. Insert the upper COLLAR stand into the neckline, fold the raw edge of the lower COLLAR stand, and topstitch into the seam of the upper COLLAR stand attachment. Topstitch along the COLLAR stand. Secure the FACINGS at the shoulder seams with a 1 cm tack.
14. Attach the center edge of the lower waistband to the outer edge of the FACING at the bottom. Press the attachment seam and turn to the right side. Stitch the lower corner of the front opening and the bottom of the garment with the waistband. Trim and turn out the lower corners of the front openings. Press the waistband, forming a piping from the upper waistband, and topstitch the upper overcast edge into the waistband attachment seam. Topstitch along the ZIPPER 0.5 cm from the edge of the front opening.
15. Overcast the elbow edge of the SLEEVE. Stitch the elbow seam of the SLEEVE up to the NOTCH for the vent. Press open the elbow seam of the SLEEVE and topstitch the vent allowances 0.5 cm onto the SLEEVE. Topstitch 0.5 cm from the elbow seam. Stitch the front seam of the SLEEVE and overcast.
16. Place CUFFS right sides together and stitch along the outer contour. Attach the upper CUFF to the lower edge of the SLEEVE. Fold the upper edge of the lower CUFF by 1 cm and topstitch into the seam of the upper CUFF attachment. Topstitch along the contour of the CUFF. Insert the SLEEVES into the armhole according to the NOTCHES. Mark and attach snaps to the COLLAR stand.