Stand-Collar Faux Leather Coat

CUTTER'S MUST

• From main fabric:
• 1. Center BACK PANEL – 2 QTY
• 2. Side BACK PANEL – 2 QTY
• 3. FRONT PANEL Yoke - 2 QTY
• 4. BACK PANEL Yoke - 1 QTY
• 5. Side FRONT PANEL – 2 QTY
• 6. Center FRONT PANEL – 2 QTY
• 7. Flap – 4 QTY
• 8. Front Pocket Flap - 4 QTY
• 9. Stand – 2 QTY
• 10. Facing – 2 QTY
• 11. Upper SLEEVE – 2 QTY
• 12. Lower SLEEVE – 2 QTY
• 13. Pocket – 4 QTY
• 14. Decorative Belt – 2 QTY
• From LINING fabric:
• 1. Center BACK PANEL – 1 QTY
• 2. Side BACK PANEL - 2 QTY
• 3. Side FRONT PANEL – 2 QTY
• 4. Center FRONT PANEL – 2 QTY
• 5. Pocket Bag – 4 QTY
• 6. Upper SLEEVE – 2 QTY
• 7. Lower SLEEVE – 2 QTY
• FROM FUSIBLE INTERFACING: Facing, center FRONT PANEL, FRONT PANEL yoke, bottom of side FRONT PANEL, BACK PANEL yoke, bottom of side BACK PANEL, front pocket flap, flap, stand, armhole of side FRONT PANEL, armhole of side BACK PANEL; hem SEAM ALLOWANCES: lower SLEEVE, upper SLEEVE, center BACK PANEL, side BACK PANEL, center BACK PANEL.

Sewing Instructions

1. Fuse the facing, center FRONT PANEL, FRONT PANEL yoke, BACK PANEL yoke, stand, armhole of side FRONT PANEL, armhole of side BACK PANEL, front pocket flap, flap; hem SEAM ALLOWANCES of the center BACK PANEL, side BACK PANEL, lower SLEEVE, upper SLEEVE, side FRONT PANEL.
2. Place the upper stand and lower stand right sides together and stitch along the outer edge.
3. Place the flaps and underflaps right sides together and stitch. Trim the SEAM ALLOWANCES of the rounded corners of the flaps and turn out. Topstitch along the outer contour of the flaps 0.5 cm from the edge.
4. Stitch the princess seams of the FRONT PANEL and BACK PANEL.
5. Place the flap on the FRONT PANEL yoke and attach it to the bottom of the yoke between the vertical NOTCHES. Attach the yoke to the FRONT PANEL. Topstitch along the FRONT PANEL yoke 0.5 cm from the edge.
6. Stitch the center back seam. Topstitch along the center back seam 0.5 cm from the edge.
7. Attach the yoke to the BACK PANEL. Topstitch along the BACK PANEL yoke 0.5 cm from the edge.
8. Attach the pocket LINING to the integrated pocket facing and stitch the LINING and pocket edges along the contour, leaving an opening in the side seam about 5 cm long for turning the pocket. Trim the SEAM ALLOWANCES of the rounded corners of the pocket and turn the pocket out.
9. Place the front pocket flap on the FRONT PANEL according to the markings and topstitch, then fold back and topstitch 0.5 cm from the topstitching seam. Place the pocket on the FRONT PANEL according to the markings and topstitch along the outer contour 0.5 cm from the edge. Secure the upper corners of the pockets with a double stitch.
10. Stitch the shoulder and side seams of the coat.
11. Insert the lower stand into the coat neckline.
12. Place the FRONT PANELS right sides together and align the edges, matching the yokes, measure the length of the facings. Attach the ZIPPER to the edge of the facing. Fold the edges of the facing in the ZIPPER area and press with a pressing cloth.
13. Attach the upper stand to the facing.
14. Place the facing on the right side of the FRONT PANEL, right side down. Stitch the ends of the stand and the facing along the marked line. Stitching is done from the FRONT PANEL side. Attach the lower edges of the facings to the FRONT PANEL strictly along the marked hemline. Trim the seams of the upper and lower corners of the facing. Turn the facings to the right side, straighten the seams. Topstitch 0.5 cm from the edge.
15. Stitch the elbow seam of the SLEEVE. Stitch the front seam of the SLEEVE. Press the hem of the SLEEVE.
16. Set the SLEEVES into the armhole according to the NOTCHES. Insert shoulder pads and SLEEVE heads.
17. On the LINING fabric pattern pieces, stitch the seams and set the SLEEVES, leaving an opening in the front right SLEEVE seam.
18. Attach the LINING to the inner edges of the facings and the upper stand. Press open the SEAM ALLOWANCES of the stand insertion seams and secure close to the seams.
19. Attach the LINING to the bottom of the coat. Turn the coat through the opening in the SLEEVE. Stitch the opening in the SLEEVE.
20. Place the decorative belt pieces right sides together and stitch, leaving an opening in the upper edge for turning. Trim the SEAM ALLOWANCES of the rounded corners of the belt and turn out. Topstitch along the outer contour of the belt 0.5 cm from the edge. Mark and attach the upper part of the snaps to the belt, and the lower part of the snaps to the FRONT PANEL.
21. Attach the upper parts of the snaps to the flap, and the lower parts to the center and side FRONT PANELS, according to the markings. Attach the upper parts of the snaps to the front flap, and the lower parts to the pocket, according to the markings.