Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5302
#5304

Leather Jacket with Decorative Waistband

Pattern #5303

A women's fitted, collarless jacket with a round neckline and a metal separating zip at the centre front. It is shaped by armhole princess seams on the front and back plus bust darts, has a topstitched band at the hem, and is fully lined. Drafted to your own measurements. Recommended fabric: faux or genuine leather, suede, suiting fabrics of blended or natural fibres.

Tech. Description

Leather Jacket with Decorative Waistband

A women's fitted, collarless jacket with a round neckline and a metal separating zip at the centre front. It is shaped by armhole princess seams on the front and back plus bust darts, has a topstitched band at the hem, and is fully lined.

When To Wear

  • In spring and autumn over T-shirts, blouses and thin knitwear.
  • With jeans, straight trousers or a dress; the hip length suits high-waisted skirts and trousers.

Key Design Features

Silhouette: Fitted, shaped by princess seams running from the armhole on the front and back, and by short bust darts on the fronts.

Length: Hip length.

Neckline: Round, collarless; the front edges are finished with facings and the back neckline with the lining.

Sleeves: One-piece set-in sleeves, eased at the cap, hem topstitched at the edge.

Closure: Separating metal zip at the centre front, from the neckline to the hem.

Back: Centre back panel and two side back panels.

Waist: The drawing shows a topstitched band at the hem, with three decorative slotted details on each side of the front zip.

Finishing: Hem and sleeve hems topstitched at the edge. Interfacing on the facings, and, as advised, on the upper back and the hems of the body and sleeves.

Lining: Full lining of the body and sleeves, attached to the hem allowances and tacked by hand under the armholes and at the hem.

Level Of Difficulty

Intermediate. Princess seams, a centre front zip set between the jacket and the facings, a full bagged lining.

Fabric Recommendations

Faux or genuine leather, suede, suiting fabrics of blended or natural fibres.

Additional Supplies

  • Lining fabric
  • Fusible interfacing
  • Separating metal zip

Cutter's Must

  • From main fabric:
    1. Front - 2 pieces
    2. Front side - 2 pieces
    3. Back - 1 piece
    4. Back side – 2 pieces
    5. Facing - 2 pieces
    6. Sleeve - 2 pieces
  • From lining fabric:
    1. Front - 2 pieces
    2. Front side - 2 pieces
    3. Back - 1 piece
    4. Back side – 2 pieces
    5. Sleeve - 2 pieces
  • From fusible interfacing: facing.

Sewing Instructions

  1. Fuse the facing with fusible interfacing; it is advisable to also fuse the upper of the back, the bottom of the sleeve, and the bottom of the front and back.
  2. Stitch the lining seams.
  3. Attach the lining front PANELs to the FACINGs.
  4. Stitch the darts on the front.
  5. Stitch the front panel seams.
  6. Attach the zipper to the front PANELs.
  7. Stitch the back panel seams.
  8. Stitch the shoulder seams.
  9. Stitch the side seams.
  10. Finish the edges with FACINGs. Finish the back neckline with lining.
  11. Stitch the sleeve seams.
  12. Set in the SLEEVEs, easing the cap.
  13. Attach the lining to the jacket hem allowance. Attach the sleeve lining to the sleeve hem. Hand-tack under the armhole and at the jacket hem. Turn the lining and jacket right side out. Close the technological opening in the sleeve.
  14. Topstitch the hem of the garment and the sleeve hem along the edge.

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?