Collared V-Neck Tunic

CUTTER'S MUST

• MAIN FABRIC:
• FRONT PANEL - QTY 2
• BACK PANEL - QTY 1 on fold
• BACK NECK FACING - QTY 1
• COLLAR - QTY 2
• SLEEVE - QTY 2
• FUSIBLE INTERFACING:
• FRONT FACING - QTY 2
• BACK NECK FACING - QTY 1
• COLLAR - QTY 1

Sewing Instructions

1. Stitch side seams, leaving the slits open at the bottom.
2. Stitch shoulder seams.
3. Clean finish the COLLAR along the outer contour. Trim SEAM ALLOWANCES close to the stitching, diagonally at corners. Turn the COLLAR right side out.
4. Stitch the BACK NECK FACING to the front facings, paying attention to the control mark.
5. Stitch the lower COLLAR into the tunic neckline and, without breaking the stitch, stitch the upper COLLAR into the necklines of the front facings and FACING. Trim SEAM ALLOWANCES close to the stitching and press open.
6. Turn the front facings and FACING to the wrong side and sew to the shoulder seam allowances.
7. Stitch the front center seam from the slit mark down to the bottom edge of the front. Press SEAM ALLOWANCES open.
8. Topstitch the COLLAR along the edge with a twin needle and, without breaking the stitch, topstitch the tunic along the edges of the front slit.
9. Turn the hem allowance of the tunic and the allowances of the side bottom slits to the wrong side, finish the corners with an envelope fold.
10. Topstitch the tunic along the edges of the side bottom slits according to the markings and, without breaking the stitch, along the bottom edge at the same distance.
11. Stitch the SLEEVE seams. Turn the hem allowance of each SLEEVE to the wrong side and topstitch with a twin needle.
12. Set in the SLEEVES, easing the caps.