Long Skirt with Front Slit

CUTTER'S MUST

• From main fabric:
1. FRONT SKIRT HALF - 2 QTY
2. BACK SKIRT HALF - 2 QTY
3. FRONT FACING - 1 QTY with fold
4. BACK FACING - 2 QTY
• From FUSIBLE INTERFACING: FACING pieces.

Sewing Instructions

1. Stitch darts, press dart excess towards center lines.
2. Stitch front center seam, leaving the slit open at the bottom. Press seam allowances open, press slit allowances to the wrong side.
3. Stitch back center seam, leaving the opening for the ZIPPER at the top.
4. Stitch side seams.
5. Attach the ZIPPER so that the teeth are not visible.
6. Press the hem allowance to the wrong side, finish front corners with an envelope fold. Topstitch the skirt along the front center seam and, without breaking the stitch, along the edges of the slit and the bottom edge at a distance of 3 cm with a twin needle.
7. Stitch side seams on the FACINGS. Place the FACING and the skirt right sides together and stitch to the upper edge of the skirt. Trim seam allowances close to the stitching, turn to the FACING and edgestitch. Turn the FACING to the wrong side and sew to the dart depths and seam allowances. Fold under the ends of the FACING and sew to the ZIPPER tapes.