Round Neck Zipper Front Peplum Jacket

Name: Round Neck Zipper Front Peplum Jacket
Brand: Minerva Patterns
SKU: 4978
Price: 5.00 EUR
Availability: InStock

Pattern #4978

A women's fitted collarless jacket in low-stretch knit fabric, with a round neckline, a separating zipper down the centre front, front princess seams, a peplum below the waist and two-piece set-in sleeves. Unlined. Drafted to your own measurements. Recommended fabric: knit fabric with low stretch, in natural or blended fibres.

Tech. Description

Round Neck Zipper Front Peplum Jacket

When To Wear

To the office with straight trousers or a pencil skirt.
Over a thin top or dress in spring and autumn.

Key Design Features

Silhouette: Fitted bodice with a flared peplum sewn on at the waist seam.

Length: Hip length, including the peplum.

Neckline: Round, collarless, finished with a back neck facing and front facings.

Sleeves: Long two-piece set-in sleeves with an elbow seam.

Closure: Separating zipper set between the front edges and the facings, running from neckline to hem.

Front: Centre and side front panels joined by princess seams; front peplum in two pieces.

Back: Centre back seam; back peplum cut in one piece on the fold.

Finishing: Seam allowances serged; hem allowances interfaced, turned up and topstitched (1.5 cm at the jacket hem, 3 cm at the sleeve hem).

Level Of Difficulty

Intermediate. A separating zipper inserted between garment and facings, two-piece sleeves, and a peplum seam on a knit fabric.

Fabric Recommendations

Knit fabric with low stretch, in natural or blended fibres.

Additional Supplies

Fusible interfacing (back neck facing, front facings, hem allowances)
Separating zipper

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm. Hem allowance for the garment bottom – 1.5 cm. Hem allowance for the sleeve bottom - 3 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (don't forget to account for paired and symmetrical pieces).

From main fabric:
- Back – 2 pieces
- Back peplum – 1 piece on fold
- Center front – 2 pieces
- Side front – 2 pieces
- Front peplum – 2 pieces
- Upper sleeve – 2 pieces
- Lower sleeve – 2 pieces
- Back neckline facing – 1 piece
- Front facing – 2 pieces
From fusible interfacing:
- Back neckline facing – 1 piece
- Front facing – 2 pieces

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

Fuse interfacing to the designated pieces. Also, fuse the hem allowance of the garment bottom and sleeve bottom.
Stitch the center back seam, press allowances to the left and serge. Attach the peplum to the back, press allowances upwards and serge.
Stitch the front princess seams, press allowances towards the center and serge. Attach the peplum to the front, press allowances upwards and serge.
Stitch the side and shoulder seams, press allowances towards the back and serge.
Stitch and press open the shoulder seams of the back neckline facing and front facings. Serge the outer edge. Place the front facings and neckline facing with the garment right sides together, insert the separating zipper between the pieces and stitch the front edge, neckline, and lower corner. Trim allowances at corners, clip curves. Turn the facings to the right side, straighten seams, and press.
Stitch the elbow and front seams of the sleeve, press allowances and serge. Set sleeves into armholes matching notches, press allowances and serge.
Serge the bottom edge of the garment and sleeves, press to the wrong side and topstitch.