Jacket with Stand Collar

Name: Jacket with Stand Collar
Brand: Minerva Patterns
SKU: 4695
Price: 5.00 EUR
Availability: InStock

Pattern #4695

A lined women's jacket with a stand collar with a drawstring, a zipper covered by a topstitched placket, an elasticated waist, lined patch pockets with buttoned flaps and a curved hem that is longer at the back. The upper front and back are cut in one with the elbow-length sleeves. Drafted to your own measurements. Recommended fabric: jacket fabrics of natural or blended fibres.

Tech. Description

Jacket with Stand Collar

When To Wear

In spring and autumn over T-shirts, shirts and fine knits.
With jeans or trousers for walks, travel and everyday wear.

Key Design Features

Silhouette: Loose, gathered at the waist by elastic stitched to the wrong side.

Length: Below the hip, with a curved hem that drops lower at the back.

Collar: Stand collar cut as one piece and interfaced, with buttonholes for the cord; a line of stitching along its upper edge forms a casing for a decorative drawstring.

Closure: Zipper inserted between the front and the interfaced front facing, covered by a front placket folded in half and topstitched along its edges.

Sleeves: Cut in one with the upper front and upper back, joined to the lower body by a curved seam. Interfaced cuffs, and a tab with a buttonhole buttoned to the sleeve to hold the turned-up cuff.

Pockets: Patch pockets on the lower fronts, lined, with a two-layer interfaced flap caught into the opening seam and fastened with one button each.

Back: Centre back seam; upper and lower back joined by a curved seam.

Finishing: Seam allowances pressed open; hem finished with front and back hem facings and topstitched.

Lining: Front and back lining with darts, attached to the facings, hem facings and inner cuffs; the jacket is turned through an opening left in the left side seam of the lining.

Level Of Difficulty

Intermediate. A bagged lining, a zipper set between front and facing, a drawstring casing in the collar, lined pockets with flaps, waist elastic and a topstitched placket.

Fabric Recommendations

Jacket fabrics of natural or blended fibres.

Additional Supplies

Lining fabric
Zipper
Elastic tape
Decorative cord
4 buttons
Fusible interfacing (front facings, back neck facing, flaps, cuffs, collar)

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical details). When stitching pieces, pay attention to the notches - they must match!

From main fabric:
- Upper Back – 2 pieces
- Upper Front – 2 pieces
- Lower Back – 2 pieces
- Lower Front – 2 pieces
- Back Neckline Facing – 1 piece
- Center Front Facing – 2 pieces
- Front Placket – 1 piece
- Cuff – 2 pieces
- Collar – 1 piece
- Pocket – 2 pieces
- Flap – 4 pieces
- Back Hem Facing – 1 piece
- Front Hem Facing – 2 pieces
- Sleeve Decorative Tab – 2 pieces
From lining fabric:
- Back Lining – 2 pieces
- Front Lining – 2 pieces
- Pocket – 2 pieces (pocket lining)
From fusible interfacing:
- Center Front Facing – 2 pieces
- Back Neckline Facing – 1 piece
- Flap – 4 pieces
- Cuff – 2 pieces
- Collar – 1 piece

Sewing Instructions

Fuse interfacing to the designated pieces.
Place the Flap pieces right sides together in pairs and stitch around the edges. Turn right side out, press. Place each Pocket and pocket lining right sides together and stitch along the pocket opening and upper edge, sandwiching the flap between them. Turn the lining back and press. Fold the flap down and stitch along the pocket opening to secure it. Overlock the pocket along the lower and side edges. Turn the seam allowances under and topstitch the pocket onto the Lower Front.
Stitch the Upper Back and Lower Back together. Press seams open. Stitch the center back seam. Press seams open.
Stitch the Upper Front and Lower Front together. Press seams open.
Stitch and press open the shoulder and side seams of the jacket.
Work buttonholes (drawstring openings) on the Collar. Stitch the outer half of the Collar to the neckline. Clip and press seams open.
Stitch the elastic tape to the wrong side along the waist, stretching it as you sew.
Stitch the shoulder seams of the Center Front Facings and Back Neckline Facing. Press seams open. Stitch the inner half of the Collar to the facing neckline. Clip and press seams open.
Place the Center Front Facing on the front, right sides together, and stitch along the front edge, inserting the zipper and stitching the collar edges at the same time. Start and end the stitching exactly at the marked hemline. Stitch along the upper edge of the collar, forming a casing.
Stitch the Cuff seam. Press the seam open. Attach the outer side of the Cuff to the sleeve.
Assemble the Back Lining and Front Lining: stitch the darts and seams, leaving an opening in the left side seam. Attach the Back Hem Facing and Front Hem Facings to the lower edge of the lining.
Fold the Front Placket in half lengthwise, right sides together, and stitch the ends. Turn right side out and press. Topstitch along the outer fold, and along the upper and lower edges. Overlock the inner edge. Place the placket on the front and stitch along the marked line. Fold the placket over the zipper and topstitch along the placket.
Tack together the neckline and collar seam allowances. Stitch the lining to the facings. Stitch the lower edge of the hem facings to the lower edge of the jacket. Attach the lining to the inner side of the cuff. Secure the cuff seam allowances together. Turn right side out through the opening. Sew up the opening. Thread the cord through the collar casing. Topstitch along the bottom of the jacket.
Fold each Sleeve Decorative Tab in half lengthwise, right sides together, and stitch along the long side and corner. Turn the tab right side out, straighten, press. Work a buttonhole on the tab. Sew the tab to the sleeve. Sew a button to the sleeve. Sew buttons to the flaps.