Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4536
#4538

Fitted Panel Seam Blouse

Pattern #4537

A fitted women's blouse with short set-in sleeves, curved panel seams that run from the neckline band and sweep out into the side seams at the hip, a wide band at the neckline and an invisible zipper at the top of the centre back seam. Drafted to your own measurements. Recommended fabric: dense blouse fabrics made from natural or blended fibres.

Tech. Description

Fitted Panel Seam Blouse

A fitted women's blouse with short set-in sleeves, curved panel seams that run from the neckline band and sweep out into the side seams at the hip, a wide band at the neckline and an invisible zipper at the top of the centre back seam.

When To Wear

  • With a pencil skirt or straight trousers for work.
  • On its own with a skirt in summer.

Key Design Features

Silhouette: Close-fitting, shaped by curved panel seams on the front and back, with no darts.

Length: Hip length, straight hem.

Neckline: Round neckline finished with a two-layer interfaced facing: the upper facing is stitched to the right side of the blouse and reads as a wide band, the lower facing turns to the inside.

Sleeves: Short, set-in, one seam, hem turned up and topstitched.

Front: One-piece centre front panel between two side front panels.

Closure: Invisible zipper in the upper part of the centre back seam; the back band is cut in two halves either side of the zipper.

Back: Centre back seam and curved panel seams matching the front.

Finishing: Seams overlocked, panel seams pressed towards the centre, side and shoulder seams pressed towards the back; blouse and sleeve hems turned up 1.5 cm and topstitched.

Level Of Difficulty

Intermediate. Long curved panel seams, a two-layer neckline band and an invisible zipper finished into the band.

Fabric Recommendations

Dense blouse fabrics made from natural or blended fibres.

Additional Supplies

  • Fusible interfacing (neckline facings)
  • Invisible zipper

Cutter's Must

From main fabric:

  • Center Back – 2 pieces
  • Side Back – 2 pieces
  • Center Front – 1 piece
  • Side Front – 2 pieces
  • Sleeve – 2 pieces
  • Front Neckline Facing – 2 pieces
  • Back Neckline Facing – 4 pieces

From fusible interfacing:

  • Front Neckline Facing – 1 piece
  • Back Neckline Facing – 2 pieces

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

  1. Fuse interfacing to the neckline facing pieces.
  2. On the back, stitch the panel seams (Center Back to Side Back). Overlock the allowances and press them towards the center. Overlock the center back edges separately on each piece. Stitch the center back seam from the zipper mark to the hem.
  3. On the front, stitch the panel seams (Center Front to Side Front). Overlock the allowances and press them towards the center.
  4. Stitch the side and shoulder seams. Overlock the allowances and press them towards the back.
  5. Stitch the shoulder seams of the Front Neckline Facing and Back Neckline Facing pieces. Press the allowances open. Place the upper and lower neckline facings right sides together and stitch along the neckline. Overlock the outer edge of the lower facing. Stitch the upper facing to the garment. Clip the allowances and turn the lower facing to the wrong side.
  6. Insert the zipper.
  7. Tack the facing to the shoulder seams and the zipper tape.
  8. Stitch the Sleeve seam. Overlock the allowance and press it towards the back. Set the Sleeve into the armhole, matching the notches. Overlock the allowance.
  9. Overlock the hem edges of the blouse and sleeves, fold them to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?