Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4535
#4537

Lightweight Collared Button-Front Shirtdress

Pattern #4536

A short women's shirtdress (tunic length) with a shirt collar on a stand, a concealed button placket, short folded double-layer sleeves with shoulder tabs, and a waist seam gathered with elastic. Drafted to your own measurements. Recommended fabric: lightweight dress or blouse fabrics in natural or blended fibres.

Tech. Description

Lightweight Collared Button-Front Shirtdress

A short women's shirtdress (tunic length) with a shirt collar on a stand, a concealed button placket, short folded double-layer sleeves with shoulder tabs, and a waist seam gathered with elastic.

When To Wear

  • In summer as a short dress, or as a tunic over trousers or leggings.
  • With a decorative belt at the waist, as recommended for this model.

Key Design Features

Silhouette: Bodice and lower part joined by a waist seam; elastic stitched to the seam allowance draws the waist in.

Length: Mid-thigh, with a curved hem that dips at the sides.

Collar: Shirt collar on a separate stand, worn open at the neck; the stand fastens with a button.

Sleeves: Short sleeves cut as a loop and folded in half lengthwise, so they are double-layer with no hem to finish; tabs set into the sleeve seam at the shoulder, fastened with a button.

Closure: Concealed button placket on the upper front, cut in one with the right front and topstitched 3 cm from the front edge; buttonholes are on the hidden inner layer. The placket ends at the waist seam.

Back: Upper and lower back joined at the waist, no centre back seam.

Waist: Elastic equal to the waist measurement, stretched and stitched to the waist seam allowance on the wrong side.

Finishing: Hem overlocked, pressed up 1.2 cm and topstitched.

Level Of Difficulty

Intermediate. A collar with a stand, a concealed placket, sleeves set in double and tabs caught in the armhole seam.

Fabric Recommendations

Lightweight dress or blouse fabrics in natural or blended fibres.

Additional Supplies

  • 9 buttons
  • Fusible interfacing (collar, collar stand, front placket)
  • Elastic tape
  • Decorative belt (recommended)

Cutter's Must

Seam allowances: all seams 1 cm. Hem allowance – 1.2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical details). When stitching details, pay attention to the notches - they must match!

From main fabric:

  • Upper back – 1 piece
  • Lower back – 1 piece
  • Upper front - 2 pieces
  • Lower front – 1 piece
  • Collar stand – 2 pieces
  • Collar – 2 pieces
  • Sleeve - 2 pieces
  • Tab - 2 pieces

From fusible interfacing:

  • Collar stand – 1 piece
  • Collar – 1 piece

Sewing Instructions

  1. Fuse interfacing to the collar stand, collar, and the integrated placket on the upper front.
  2. Place the upper collar on the lower collar, right sides together, and stitch the ends and the outer edge. Trim seam allowances at corners, turn the collar right side out, shape, and press. Place collar stand pieces right sides together, insert the finished collar between them, align notches, and stitch, simultaneously stitching the ends of the stand. Start and end the stitching strictly at the marked seam line for attaching the stand. Turn the finished collar right side out and press.
  3. Right upper front: Press the front inward to the wrong side along the “edge of placket” and “edge of concealed placket” lines. Stitch a topstitch along the inner edge of the placket at a distance of 3 cm from the edge of the placket. Fold the inner of the placket towards the placket, press. Make buttonholes on the inner. Left front: Trim the front along the “inner edge of placket” line + 1cm. Fold the placket inward first by 1 cm, then by another 3 cm, and stitch a topstitch along the inner edge of the placket. Overlap the right front over the left and continue to treat as one piece.
  4. Stitch the upper and lower back and front parts, press seam allowances upwards and overlock.
  5. Stitch the side and shoulder seams, press seam allowances towards the back and overlock.
  6. Stitch the outer collar stand to the neckline, fold the raw edge of the inner collar stand and topstitch into the attachment seam.
  7. Stitch the sleeve into a loop, press seam allowances open. Fold the sleeve in half lengthwise, right side out, and stitch into the armhole, aligning it with the wrong side of the garment. Overlock seam allowances, fold the sleeve to the right side, press.
  8. Fold the tabs in half lengthwise, right sides together, and stitch along the long and short edges. Turn right side out, trimming seam allowances at corners, shape, and press. Overlock the open short edge. Topstitch the tabs into the sleeve attachment seam at the shoulder from the wrong side.
  9. Overlock the bottom edge of the garment, press to the wrong side, and topstitch.
  10. Cut a piece of elastic tape equal to the waist circumference and topstitch it, stretching, to the seam allowance of the upper and lower parts on the wrong side.
  11. Make buttonholes on the tabs and collar stand. Sew buttons on the left front, collar stand, and shoulder seams. Tip: The tunic is recommended to be worn with a decorative belt.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?