Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4525
#4527

Short Sleeve Asymmetric Rounded Collar Jacket

Pattern #4526

A hip-length women's jacket with an asymmetric wrap front fastened with a button at the neck, a wide rounded collar that runs from the back neck down the front edge, and short set-in sleeves with turned-up cuffs. Unlined. Drafted to your own measurements. Recommended fabric: suiting fabrics made from natural or blended fibres.

Tech. Description

Short Sleeve Asymmetric Rounded Collar Jacket

A hip-length women's jacket with an asymmetric wrap front fastened with a button at the neck, a wide rounded collar that runs from the back neck down the front edge, and short set-in sleeves with turned-up cuffs. Unlined.

When To Wear

  • Over a sheath dress, or a top with a straight skirt, for work.
  • As a light layer in late spring and early autumn.

Key Design Features

Silhouette: Semi-fitted, shaped with darts on the front and back.

Length: Hip length, straight hem.

Collar: Wide rounded collar of two interfaced pieces, set between the jacket and the facing along the neckline and front edges.

Sleeves: Short set-in sleeves; the sleeve seam is stitched together with the side seam, and the hem is folded inside to a mark and turned out to form a cuff.

Front: Asymmetric overlap with a diagonal front edge crossing to the left side; front darts pressed downwards.

Closure: Buttons and buttonholes; one button visible at the upper front edge.

Back: Centre back seam and darts pressed towards the centre.

Finishing: Front facings and back neck facing joined at the shoulders, interfaced and overlocked on the outer edge; hem overlocked, turned up 2 cm and topstitched.

Level Of Difficulty

Intermediate. A collar inserted between jacket and facing in one pass around the front edges and neckline, an asymmetric front and buttonholes.

Fabric Recommendations

Suiting fabrics made from natural or blended fibres.

Additional Supplies

  • Fusible interfacing (front facings, back neck facing, collar)
  • 2 buttons

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm. Hem allowance for jacket bottom and sleeve bottom - 2.0 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical details). When stitching pieces, pay attention to the notches - they must match!

From main fabric:

  • Back – 2 pieces
  • Front – 2 pieces
  • Sleeve – 2 pieces
  • Collar – 2 pieces
  • Center Front Facing – 2 pieces
  • Back Neckline Facing – 1 piece

From fusible interfacing:

  • Center Front Facing – 2 pieces
  • Back Neckline Facing – 1 piece
  • Collar – 2 pieces

Sewing Instructions

  1. Fuse interfacing to the Center Front Facings, Back Neckline Facing and Collar pieces.
  2. On the back, stitch and press darts towards the center. Stitch the center back seam. Overlock the allowance and press to the left side.
  3. Stitch the darts on the Front. Press the darts downwards.
  4. Stitch shoulder seams, overlock allowances and press towards the back.
  5. Set sleeves into armholes. Overlock allowances. Stitch the side seam simultaneously with the sleeve seam. Overlock allowances and press towards the back. Overlock the lower edge of the sleeve. Fold the lower edge up to the inside, aligning it with the upper mark, and stitch. Turn the resulting cuff up to the right side.
  6. Stitch the shoulder seams joining the Back Neckline Facing and the Center Front Facings and press them open. Overlock the outer edge of the facing.
  7. Place the facing on the right side of the jacket, right side down, pin and stitch along the front edges and neckline in one pass, inserting the Collar between the jacket and the facing. Clip the allowances at the corners. Turn out the front edges, straighten seams, and press.
  8. Overlock the bottom edge of the jacket, fold inwards, and topstitch.
  9. Work buttonholes and sew on buttons.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?