Pattern

CUTTER'S MUST

• From main fabric:
1. Back Yoke - 1 QTY
2. Center BACK PANEL - 1 QTY
3. Side BACK PANEL - 2 QTY
4. Side FRONT PANEL - 2 QTY
5. Center FRONT PANEL – 2 QTY
6. Pocket – 2 QTY
7. Flap – 4 QTY
8. COLLAR - 2 QTY
9. Collar Stand - 2 QTY
10. SLEEVE - 2 QTY
11. CUFF - 2 QTY
12. Sleeve Placket - 2 QTY
13. Sleeve Tab - 2 QTY
14. Belt Loop – 1 QTY
15. Belt – 1 QTY
• From FUSIBLE INTERFACING:
1. COLLAR - 1 QTY
2. Collar Stand - 1 QTY
3. Flap – 2 QTY
4. CUFF – 2 QTY

Sewing Instructions

1. Fuse FUSIBLE INTERFACING to the respective pieces.
2. Stitch the BACK PANEL princess seams, press SEAM ALLOWANCES towards the center, overcast and topstitch with a double stitch at 0.1 cm and 0.7 cm from the seam. Attach the back yoke to the BACK PANEL, press SEAM ALLOWANCES upwards, overcast and topstitch with a double stitch at 0.1 cm and 0.7 cm from the seam.
3. Stitch the FRONT PANEL princess seams, clipping the SEAM ALLOWANCE at the corner, press SEAM ALLOWANCES towards the center, overcast and topstitch with a double stitch at 0.1 cm and 0.7 cm from the seam.
4. Fold the inner edge of the integrated placket inwards by 1 cm, press the placket to the wrong side and topstitch onto the FRONT PANEL.
5. Create a box pleat on the pockets. Overcast the upper SEAM ALLOWANCE of the pockets, press to the wrong side and topstitch. Press the side and bottom SEAM ALLOWANCES of the pockets to the wrong side. Place the pockets on the FRONT PANEL according to markings and topstitch with a double stitch at 0.1 cm and 0.7 cm.
6. Place the flap pieces right sides together and stitch around. Trim the corner SEAM ALLOWANCES of the flaps and turn right side out. Straighten the seams and press. Topstitch at 0.1 cm and 0.7 cm from the edge. Overcast the raw edge of the flaps, overcast buttonholes. Attach the flaps to the FRONT PANEL above the pockets, turn downwards and topstitch. Sew buttons onto the pockets according to the buttonholes.
7. Stitch shoulder and side seams, press SEAM ALLOWANCES towards the BACK PANEL and overcast.
8. Place the upper COLLAR with the undercollar right sides together. Stitch the ends and outer edge of the COLLAR. Trim the seams. Turn the COLLAR right side out, straighten and press. Place the collar stand pieces right sides together, insert the finished COLLAR between them, align the NOTCHES and stitch, simultaneously stitching the ends of the collar stand. Start and end the stitching precisely at the marked seam line for attaching the collar stand. Turn the finished COLLAR right side out and press.
9. Attach the outer collar stand with the COLLAR to the neckline, fold under the raw edge of the inner collar stand and topstitch into the seam. Topstitch along the COLLAR and collar stand at 0.1 cm.
10. Fold the SLEEVE tab in half lengthwise, right sides together, and stitch along the long and shaped sides. Turn the tab right side out, press, overcast the short edge. Overcast the buttonhole. Topstitch the tab to the wrong side of the SLEEVE according to markings. Sew a button to the right side in this location.
11. Sleeve slit treatment: Cut the SLEEVE along the marked line, clipping the corner at the top of the slit. Fold the section from the slit to the marked line, equal to 1.7 cm, inwards twice by 0.5 cm and topstitch. Fold the placket in half lengthwise, right sides together, and stitch the corner up to the crosswise mark. Trim seam SEAM ALLOWANCES close to the stitching, clip the SEAM ALLOWANCE at the end of the stitching. Turn the placket right side out, press and topstitch along the fold line from the bottom to the crosswise mark at 0.1 cm. Place the placket with the SLEEVE right sides together and attach the inner side along the marked line. At the end of the stitching, clip the SLEEVE crosswise from the slit to the attachment line. Fold the placket to the right side, fold under the raw edge and attach. Align the placket with the marked line on the SLEEVE and topstitch the upper corner along the contour and along the crosswise mark.
12. Stitch the SLEEVE seam, press SEAM ALLOWANCES and overcast. Set the SLEEVES into the armholes, aligning NOTCHES, press SEAM ALLOWANCES and overcast.
13. Fold the CUFFS in half and stitch the short sides. Start and end the stitching precisely at the marked CUFF attachment line. Turn the CUFFS right side out and press. Create pleats on the SLEEVE according to the marked lines. Attach the outer side of the CUFF to the SLEEVE. Fold under the inner side of the CUFF and topstitch into the attachment seam. Overcast buttonholes on the CUFFS and sew on buttons.
14. Overcast the bottom edge of the garment, press to the wrong side and topstitch.
15. Overcast one long edge of the belt loop. Fold the belt loop into three layers and topstitch along the long sides. Cut the belt loop into 2 pieces. Topstitch the belt loops at the waist to the side seams according to markings.
16. Fold the belt in half lengthwise, right sides together, and stitch, leaving an opening on the long side for turning. Turn the belt right side out and press. Topstitch the belt around the perimeter with a double stitch at 0.1 cm and 0.7 cm from the edge.
17. Overcast buttonholes on the right FRONT PANEL, sew buttons on the left FRONT PANEL.