Fitted Collared Button Front Vest

CUTTER'S MUST

• From main fabric:
1. Center FRONT PANEL - 4 QTY
2. SIDE PANEL - 2 QTY
3. BACK SIDE PANEL – 2 QTY
4. Center BACK PANEL – 2 QTY
5. COLLAR piece – 4 QTY
• From LINING fabric:
1. Center BACK PANEL - 2 QTY
2. BACK SIDE PANEL - 2 QTY
3. FRONT SIDE PANEL - 2 QTY
• From FUSIBLE INTERFACING:
1. Center FRONT PANEL – 2 QTY
2. COLLAR piece – 4 QTY

Sewing Instructions

1. Fuse FUSIBLE INTERFACING to the inner center FRONT PANEL and COLLAR pieces.
2. Stitch the princess seams on the BACK PANEL, press the seam allowances towards the center. Stitch the center back seam. Press the seam allowance open.
3. Stitch the princess seams on the front pieces, press the seam allowances towards the center. Stitch the side seams. Press the seam allowances open. Attach the COLLAR piece to the FRONT PANEL. Press the seam allowance open.
4. Cut a TRIM STRIP 6 cm wide. Fold in half lengthwise and press. Fold the outer edges towards the center and press again. Stitch the folds along the strap 0.2 cm from the edge.
5. Stitch the LINING pieces similarly to the main pieces, leaving an opening in the left side seam. Attach the inner FRONT PANEL and inner COLLAR piece.
6. Place the main and LINING pieces right sides together and stitch along the contour, inserting the straps. Turn right side out through the opening. Close the opening.
7. Make buttonholes on the FRONT PANELS and sew on buttons.