Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4501
#4503

Center Front Horizontal Bust Dart Blouse

Pattern #4502

A semi-fitted women's blouse with a round neckline and short set-in sleeves. The front has a centre seam with horizontal bust darts running into it; the back has a centre seam, vertical darts and a concealed zip at the neck. Drafted to your own measurements. Recommended fabric: firm blouse fabrics of natural or blended fibres.

Tech. Description

Center Front Horizontal Bust Dart Blouse

A semi-fitted women's blouse with a round neckline and short set-in sleeves. The front has a centre seam with horizontal bust darts running into it; the back has a centre seam, vertical darts and a concealed zip at the neck.

When To Wear

  • To the office, tucked into or worn over a pencil skirt or tailored trousers.
  • Under a jacket or cardigan in spring and autumn.

Key Design Features

Silhouette: Semi-fitted, slightly shaped at the waist, straight hem.

Length: Hip length.

Neckline: Round, finished with an interfaced facing; facing ends attached to the zip tape.

Sleeves: One-piece set-in sleeves ending above the elbow, hem turned up and topstitched.

Front: Centre front seam; a horizontal dart on each side at bust level, pressed downwards.

Back: Centre back seam and one vertical waist dart on each side.

Closure: Concealed zip in the upper part of the centre back seam.

Finishing: Hem turned up 2 cm and topstitched; neckline seam allowances understitched to the facing 0.2 cm from the seam.

Level Of Difficulty

Beginner. Darts, set-in sleeves, a neck facing and a concealed zip; few pieces and straight construction.

Fabric Recommendations

Firm blouse fabrics of natural or blended fibres.

Additional Supplies

  • Concealed zip
  • Fusible interfacing (neck facings)

Cutter's Must

From main fabric:

  • Front – 2 pieces
  • Back – 2 pieces
  • Sleeve – 2 pieces
  • Back neck facing – 2 pieces
  • Front neck facing – 1 piece

From fusible interfacing:

  • Back neck facing – 2 pieces
  • Front neck facing – 1 piece

Sewing Instructions

  1. Fuse fusible interfacing to the respective pieces.
  2. Stitch darts on back pieces. Press dart allowances towards the center. Serge the center back seam allowance separately. Stitch the center back seam from the zipper notch to the hem. Insert the zipper.
  3. Stitch darts on front pieces. Press dart allowances downwards. Stitch the center front seam. Serge the seam allowance and press to the left side.
  4. Stitch shoulder and side seams. Serge seam allowances and press towards the back.
  5. Stitch the sleeve seam. Serge the seam allowance and press towards the back. Set the sleeve into the armhole, matching notches. Serge the seam allowance.
  6. Stitch shoulder seams of facings. Press seam allowances open. Serge the outer edge of the facings. Place the facing onto the neckline, right side down, and stitch along the neckline. Clip seam allowances, turn the facing to the wrong side and press. Topstitch the seam allowances to the facing 0.2 cm from the seam. Secure the ends of the facing to the zipper tape.
  7. Serge the bottom edge of the garment and the sleeve hem. Fold to the wrong side, press, and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?