Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4478
#4480

Fitted Lace Yoke and Sleeve Dress

Pattern #4479

A knee-length women's dress with princess seams front and back, a lace yoke with short lace cap sleeves, and two lace gores set into the lower front. The skirt flares from the hips; invisible zipper at the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres for the body; lace for the yoke, sleeves and gores.

Tech. Description

Fitted Lace Yoke and Sleeve Dress

A knee-length women's dress with princess seams front and back, a lace yoke with short lace cap sleeves, and two lace gores set into the lower front. The skirt flares from the hips; invisible zipper at the centre back.

When To Wear

  • For daytime events, dinners and family celebrations in spring and summer.
  • At the office, with a jacket over it.

Key Design Features

Silhouette: Fitted through the bodice and waist by princess seams, flaring from the hips to the hem.

Length: Knee length.

Neckline: Wide, rounded square neckline in the lace yoke, faced with a second lace yoke.

Sleeves: Short lace cap sleeves set into the armholes; the lower armhole is finished with a folded bias binding.

Front: Lace yoke over a one-piece centre front and two side fronts. Lace gores are sewn to the lower centre front and run up the princess seams from the hem.

Back: Double lace yoke, centre back seam with an invisible zipper from the neckline, princess seams.

Finishing: Overlocked seams; the inner yoke is hand-sewn to the zipper tape and stitched into the yoke seam; dress and sleeve hems turned up and topstitched.

Level Of Difficulty

Intermediate. Sewing lace, gores set into princess seams, a doubled yoke enclosing the neckline and an invisible zipper.

Fabric Recommendations

Dress fabrics of natural or blended fibres for the body; lace for the yoke, sleeves and gores.

Additional Supplies

  • Invisible zipper

Cutter's Must

From lace fabric:

  • Back yoke - 4 pieces
  • Front yoke - 2 pieces
  • Sleeve - 2 pieces
  • Lower gore - 2 pieces

From main fabric:

  • Back (center) — 2 pieces
  • Back (side) - 2 pieces
  • Front (side) — 2 pieces
  • Front (center) — 1 piece

Sewing Instructions

  1. Stitch the back princess seams, press seam allowances towards the center and serge. Attach the back yokes to the back, press seam allowances towards the yoke and serge. Serge the center back seam separately on each piece. Stitch the center back seam from the zipper mark downwards, press the seam allowances open, pressing the slit. Insert the zipper.
  2. Attach the lower gores to the center front, press seam allowances, and serge. Stitch the front princess seams, press seam allowances towards the center and serge. Attach the front yoke to the front, press seam allowances towards the yoke and serge.
  3. Stitch the shoulder and side seams of the dress, press seam allowances towards the back and serge.
  4. Stitch the shoulder seams on the inner yokes, press seam allowances towards the back and serge. Serge the bottom edge.
  5. Place the inner yoke with the outer yoke and stitch the neckline edge. Clip seam allowances, turn the inner yoke to the wrong side, straighten, and press. Hand stitch the center edges of the inner yoke to the zipper tape. Topstitch the inner yoke into the seam attaching the outer yoke and then treat as one piece.
  6. Serge the lower edge of the sleeve. Fold the seam allowance inwards and topstitch. Set the sleeves into the armholes, serge seam allowances. Cut a bias binding 4 cm wide and a length equal to the length of the lower of the armhole + 6 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the binding with the armhole edge on the right side, leaving tails, and stitch. Fold the binding to the wrong side, clip the seams, and topstitch along the fold to the main piece. Press the seam.
  7. Serge the lower edge of the dress. Fold the seam allowances inwards and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?