Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4479
#4481

Capelet Jacket with Front Zipper

Pattern #4480

A women's two-layer jacket: a lined, sleeveless base with princess seams and a separating front zipper, under a cape that covers the shoulders and arms and falls to a point at the centre front. Straps with buckles at the sides. Drafted to your own measurements. Recommended fabric: suiting fabrics of natural or blended fibres.

Tech. Description

Capelet Jacket with Front Zipper

A women's two-layer jacket: a lined, sleeveless base with princess seams and a separating front zipper, under a cape that covers the shoulders and arms and falls to a point at the centre front. Straps with buckles at the sides.

When To Wear

  • In spring and autumn over long-sleeved tops, blouses and turtlenecks.
  • With slim trousers or a straight skirt.

Key Design Features

Silhouette: Base fitted by princess seams and back darts; the cape is loose and flared.

Length: Base ends at the high hip; the cape ends at about the elbow at the sides and dips to a point near the base hem at the centre front.

Neckline: Round and collarless, topstitched; the back neckline is stabilised with fusible tape.

Closure: Separating zipper at the centre front, set between the base and the facings, catching the cape edges.

Waist: Front straps sewn into the front princess seams and back straps into the back princess seams, joined with a buckle on each side and held by belt loops at the side seams.

Back: Base with a centre back seam, princess seams and darts. The cape has a centre back seam and is hand-tacked to the base at waist level.

Finishing: Front edges and neckline topstitched; cape hem overlocked and topstitched 1.5 cm from the edge.

Lining: Base fully lined, including the sleeveless armholes; the cape is unlined.

Level Of Difficulty

Intermediate. A separating zipper set between the facing and two layers, straps sewn into princess seams, and a lined sleeveless base with the armholes bagged in two steps.

Fabric Recommendations

Suiting fabrics of natural or blended fibres.

Additional Supplies

  • Lining fabric
  • Fusible interfacing (front facings, back neck facing)
  • Fusible stay tape for the back neckline
  • Separating zipper
  • 2 buckles

Cutter's Must

From main fabric:

  • Back, center – 2 pieces
  • Back, side – 2 pieces
  • Front, side – 2 pieces
  • Front, center – 2 pieces
  • Front facing – 2 pieces
  • Back neckline facing – 1 piece
  • Front cape – 2 pieces
  • Back cape – 2 pieces
  • Belt loops – 1 piece
  • Front strap – 2 pieces
  • Back strap – 2 pieces

Lining pieces are cut according to the main fabric pieces, excluding the width of the back neckline facing and front facing.

From lining fabric:

  • Back, center – 2 pieces
  • Back, side – 2 pieces
  • Front, side – 2 pieces
  • Front, center – 2 pieces

From fusible interfacing: front facing, back neckline facing.

Sewing Instructions

  1. Fuse interfacing to the pieces. Along the back neckline, apply an additional fusible interfacing strip.
  2. Fold the strap in half lengthwise, right sides together, and stitch along one short and one long side. Trim seam allowances, turn right side out, and press. Finish the second strap similarly.
  3. Stitch the dart on the center back. Press the dart depth towards the center. Stitch and press open the princess seams on the back, inserting the back strap into the seam. Stitch the center back seam. Press the seam allowance open.
  4. Stitch the princess seam on the front, inserting the front strap. Press the seam allowance towards the center.
  5. Stitch the shoulder and side seams of the poncho. Press seam allowances open.
  6. On the belt loop piece, serge one long edge. Press the un-serged edge inwards, covering it with the serged edge. Stitch a double seam, securing the long seam allowances. Cut the belt loop into 2 pieces. Attach the belt loops at the level of the side seam.
  7. Stitch the shoulder seams of the cape. Serge and press open the seam allowances. Stitch the center back seam. Serge and press open the seam allowance. Serge the bottom edge of the cape and topstitch 1.5 cm from the edge. Place the cape on the poncho, align and secure the front edge and neckline edges.
  8. Stitch and press open the shoulder seams of the back neckline facing and front facing. Attach the zipper to the front edges. Place the front facing and facing on the poncho, secure along the edges, and stitch along the neckline and front edges. Trim seam allowances at corners, turn right side out, and press.
  9. Stitch the lining pieces similarly to the main fabric pieces, leaving an opening in the left side seam. Attach the lining to the facing and front facing. Stitch the armhole in two steps: first the front armhole, then the back armhole. Attach the lining to the bottom of the poncho. Turn the poncho right side out through the opening. Close the technical opening.
  10. Thread the buckle onto the back strap and secure the end. Topstitch along the front edge and neckline. Hand-tack the back cape to the center back seam at the waist level.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?