Hooded Fine Wool Cape

CUTTER'S MUST

• From main fabric:
• 1. BACK PANEL - 1 QTY
• 2. FRONT PANEL - 2 QTY
• 3. SLEEVE – 2 QTY
• 4. Hood – 2 QTY
• 5. Belt - 1 QTY
• 6. Belt Loop – 1 QTY

Sewing Instructions

1. Stitch the center seam of the hood. Press the seam. Fold the BIAS BINDING in half lengthwise and press. Finish the SEAM ALLOWANCES with BIAS BINDING.
2. Stitch the shoulder seams. Overlock the seams and press towards the BACK PANEL.
3. Set the hood into the neckline. Press the seam towards the hood. Finish the seam allowance with BIAS BINDING.
4. Finish the lower edge of the SLEEVE with BIAS BINDING.
5. Set the SLEEVE into the open armhole.
6. Stitch the SLEEVE seam and the side seam in one continuous seam. Press the seams open.
7. Finish the lower edge of the garment with BIAS BINDING. Finish the edge of the front opening and the hood. Press the front opening along the marked line and topstitch.
8. Fold the Belt Loop right sides together and stitch. Turn the piece right side out and press. Cut the Belt Loop into 4 pieces. Attach the Belt Loops along the marked line to the BACK PANEL and FRONT PANEL.
9. Fold the belt in half lengthwise, right sides together, and stitch along three sides, leaving an opening of 7-10 cm in the middle of the long side of the belt. Turn the belt right side out and press. Topstitch along the contour at a distance of 0.5 cm, simultaneously closing the opening.