Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4469
#4471

Collarless 3/4 Sleeve Princess Seam Coat

Pattern #4470

A fitted, knee-length women's coat with a round collarless neckline, princess seams with pockets set into them, two-piece three-quarter sleeves with button vents and a single-breasted button front. Fully lined, with a back vent. Drafted to your own measurements. Recommended fabric: coating fabrics of natural or blended fibres.

Tech. Description

Collarless 3/4 Sleeve Princess Seam Coat

A fitted, knee-length women's coat with a round collarless neckline, princess seams with pockets set into them, two-piece three-quarter sleeves with button vents and a single-breasted button front. Fully lined, with a back vent.

When To Wear

  • In spring and early autumn over dresses and slim skirts.
  • Over office wear, with long gloves or knitwear under the shorter sleeves.

Key Design Features

Silhouette: Fitted, shaped by princess seams and darts on the front and back.

Length: Knee length.

Neckline: Round collarless neckline finished with front facings and a back neck facing.

Sleeves: Two-piece set-in sleeves with elbow and front seams, three-quarter length, with a vent closed by three buttons; shoulder pads and sleeve head rolls.

Front: Single-breasted, five buttons on the drawing, buttonholes on the right front.

Pockets: In-seam pockets in the front princess seams, with pocket bags cut from lining.

Back: Centre back seam with a vent, princess seams and darts.

Finishing: Hems turned up 3 cm; armhole areas, pocket openings, vents and hem interfaced.

Lining: Full lining cut from the main pieces minus the facings, bagged out through an opening in the left side seam.

Level Of Difficulty

Intermediate. A mitred back vent and sleeve vents, in-seam pockets caught into princess seams, an eased two-piece sleeve and a bagged lining.

Fabric Recommendations

Coating fabrics of natural or blended fibres.

Additional Supplies

  • Lining fabric
  • Fusible interfacing
  • Buttons for the front and the sleeve vents
  • Shoulder pads
  • Sleeve head rolls

Cutter's Must

From main fabric:

  • Back center – 2 pieces
  • Back side – 2 pieces
  • Front center – 2 pieces
  • Front side – 2 pieces
  • Sleeve upper – 2 pieces
  • Sleeve lower – 2 pieces
  • Back neckline facing – 2 pieces
  • Front facing – 2 pieces

From lining fabric:

  • Back center – 2 pieces
  • Front center – 2 pieces
  • Back side – 2 pieces
  • Front side – 2 pieces
  • Sleeve upper – 2 pieces
  • Sleeve lower – 2 pieces
  • Pocket bag — 4 pieces

From fusible interfacing:

  • Front center — 2 pieces
  • Front facing — 2 pieces
  • Back neckline facing — 2 pieces

Also, interface the armhole areas on the back, pocket opening, back and sleeve vents, and the garment hem.

Sewing Instructions

  1. Interface the pattern pieces with fusible interfacing.
  2. On the back, stitch the darts, press the fullness towards the center. Stitch the back princess seam allowances, press the seam allowances open. On the wrong side of the back pieces, interface the vent. On the right side, mark the center seam line (vent fold line). Press the left back along the vent fold line. Align the pieces along the center seam. Stitch the center back seam and the vent corner, stopping 1 cm before the vertical vent edge. Clip the vent seam allowance corner on the right. Press the center seam seam allowances open, press the vent seam allowances and secure them on the right side with machine stitching.
  3. On the front, stitch the darts, press the fullness downwards. Attach the pocket bag to the center front and side front. On the front, stitch the princess seam allowances, simultaneously stitching the pocket bag. Press the seam allowances open, clipping the corner on the side front. Press the pocket towards the center.
  4. Stitch the shoulder and side seam allowances, press the seam allowances open.
  5. Stitch and press the elbow seam of the sleeve towards the upper. Finish the sleeve vent. Stitch and press the front sleeve seam open. Along the upper edge of the sleeve cap, stitch with a small stitch length. Gather and ease the sleeve cap. Set the sleeves into the armhole, matching the notches. Insert shoulder pads and sleeve head rolls.
  6. Stitch the shoulder seam allowances of the front facings and facing, press the seam allowances open.
  7. Press up the garment hem. Place the front facing on the right side of the front, right side down. Pin the front facing and the top of the garment and stitch along the front edge and neckline. Attach the lower edge of the front facing to the front strictly along the marked hemline, stopping 1.5 cm before the inner edge of the front facing. Turn the front edges to the right side, straighten the seams.
  8. On the lining fabric pattern pieces, stitch the seams, leaving an opening in the left side seam for turning. Set in the sleeves. Attach the lining to the front facings and facing. Attach the lining to the hem of the garment. Turn the coat through the opening. Close the opening.
  9. On the right front, make buttonholes; on the left front, sew on buttons. Sew buttons to the sleeve vent.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?