Blouse with Lace Inserts
A women's semi-fitted blouse with a lace insert across the shoulders that also forms the short cut-on sleeves, narrow front and back yokes above it, a shirt collar on a stand and a five-button front placket.
When To Wear
- In spring and summer, with skirts or trousers.
- At the office under a jacket left open, where the lace shows at the shoulders.
Key Design Features
Silhouette: Semi-fitted, shaped by waist darts on the front and back; straight hem at hip level.
Collar: Turn-down shirt collar set into a separate collar stand.
Sleeves: Short cut-on sleeves, part of the lace insert; the lower edge is overlocked, turned in and topstitched.
Front: Front yokes at the neckline, a curved lace insert below them, and the lower front. Sewn-on button placket with five buttons.
Back: Back yoke at the neckline, lace insert, and the back cut in one piece on the fold, with waist darts.
Finishing: Seams overlocked; hem turned twice by 1 cm and topstitched.
Level Of Difficulty
Intermediate. A collar on a stand, sewn-on plackets, and curved seams joining lace to the yokes and bodice.
Fabric Recommendations
Blouse fabrics of natural or blended fibres for the body, yokes, collar and plackets; lace for the insert.
Additional Supplies
- Fusible interfacing (collar, collar stand, plackets)
- 5 buttons
Cutter's Must
From main fabric:
- Back – 1 piece on fold
- Lower Front – 2 pieces
- Back Yoke – 1 piece
- Front Yoke – 2 pieces
- Collar – 2 pieces
- Stand Collar – 2 pieces
- Placket – 2 pieces
From lace:
From fusible interfacing:
- Collar – 1 piece
- Stand Collar – 1 piece
- Placket – 2 pieces
Sewing Instructions
- Fuse interfacing to the Collar, the Stand Collar and the Placket pieces.
- Place the Collar pieces right sides together and stitch along the outer edge. Trim the seam allowances at the corners. Turn the collar right side out and press. Insert the collar between the two Stand Collar pieces and stitch. Start and end the stitching exactly at the marked neckline seam line of the stand. Notch the seam allowances on the curves, turn the stand right side out and press.
- Stitch the waist darts on the Back and the Lower Fronts. Press the back darts towards the centre back; trim the front darts with the overlocker and press them towards the centre front.
- Stitch the shoulder seams of the Front Yokes and Back Yoke. Overlock the seam allowances and press them towards the back. Stitch the yokes to the Insert. Overlock the seam allowances and press them towards the yoke. Stitch the Insert to the Lower Fronts and the Back. Overlock the seam allowances and press them towards the front and back.
- Overlock the lower edge of the cut-on sleeve. Turn the allowance under and topstitch.
- Stitch the side seams, press the seam allowances towards the back and overlock.
- Place the Placket on the front, right sides together, and stitch. Fold the placket over to the wrong side, turn under the allowance of its inner half and stitch it in the ditch of the placket seam.
- Stitch the upper Stand Collar to the neckline, turn under the open edge of the lower stand and stitch it in the ditch of the stand seam.
- Turn the hem of the blouse twice by 1 cm to the wrong side and topstitch.
- Make the buttonholes and sew on the buttons.