Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4457
#4459

Fitted Sleeved Dress with Front Pleats

Pattern #4458

A women's fitted, straight dress with short set-in sleeves, curved princess seams front and back, and a centre front panel with pleats held by a strap and a decorative buckle at the waist. The side panels and sleeves are cut from a second fabric. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres, in two contrasting or related colours: one for the centre panels, strap and facings, the other for the side panels and sleeves.

Tech. Description

Fitted Sleeved Dress with Front Pleats

A women's fitted, straight dress with short set-in sleeves, curved princess seams front and back, and a centre front panel with pleats held by a strap and a decorative buckle at the waist. The side panels and sleeves are cut from a second fabric.

When To Wear

  • At the office and at business meetings, alone or under a jacket.
  • For daytime events in spring and autumn, in two contrasting or related colours.

Key Design Features

Silhouette: Fitted bodice and straight, close-fitting skirt, about knee length.

Neckline: Round neckline finished with a facing.

Sleeves: Short set-in sleeves, cut from the second fabric.

Front: Centre front cut in two parts, upper and lower, both on the fold. The upper part has bust darts; the lower part has pleats turned towards the side seams. A strap with a decorative buckle crosses the seam between them and is caught in the princess seams.

Back: Curved princess seams and a centre back seam.

Closure: Invisible zipper in the upper centre back seam.

Finishing: Seams overlocked; facing hand-stitched to the shoulder seams and the centre back seam; dress and sleeve hems turned up and topstitched.

Level Of Difficulty

Intermediate. Curved princess seams, pleats, a strap caught into seams, an invisible zipper and a neckline facing.

Fabric Recommendations

Dress fabrics of natural or blended fibres, in two contrasting or related colours: one for the centre panels, strap and facings, the other for the side panels and sleeves.

Additional Supplies

  • Fusible interfacing (neckline facings)
  • Invisible zipper
  • Decorative buckle

Cutter's Must

From main fabric:

  • Center back – 2 pieces
  • Center upper front — 1 piece on fold
  • Center lower front — 1 piece on fold
  • Strap — 1 piece
  • Back facing — 2 pieces
  • Front facing — 1 piece

From main fabric 1:

  • Side of back – 2 pieces
  • Side of front — 2 pieces
  • Sleeve — 2 pieces

From fusible interfacing:

  • Back facing — 2 pieces
  • Front facing — 1 piece

Sewing Instructions

  1. Fuse fusible interfacing to facing pieces.
  2. Stitch the princess seams of the back. Press seam allowances towards the center and serge.
  3. Serge the center back seam separately on each piece. Stitch the center back seam from the zipper mark downwards. Press the seam allowances open, pressing the slit. Insert the zipper.
  4. Stitch the bust darts, press the depths downwards. On the center lower front, create and secure the pleats (depths directed towards the side seams). Stitch the center upper and lower front PANELs together, press seam allowances upwards and serge.
  5. Fold the strap in half lengthwise, right sides together, and stitch the long edge. Turn the strap right side out and press. Attach a decorative buckle. Place the strap on the front and secure along the princess seams. Stitch the princess seams of the front. Press seam allowances towards the side and serge.
  6. Stitch the side and shoulder seams. Press seam allowances towards the back and serge.
  7. Stitch the shoulder seams of the FACINGs, press seam allowances open. Serge the outer edge. Place the facing on the neckline and stitch. Clip seam allowances, turn the facing to the wrong side, smooth out, and press. Hand-stitch the facing to the shoulder seams and the seam allowances of the center back seam.
  8. Stitch the sleeve seam, press seam allowances towards the back and serge. Set the SLEEVEs into the armholes, matching the notches. Press and serge seam allowances.
  9. Serge the bottom edge of the dress and SLEEVEs, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?