Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4443
#4445

A-Line Maxi Dress with Keyhole Stand Collar and V-Back Bow

Pattern #4444

A lined women's maxi dress, fitted through the bodice and flaring to the ankle, with a stand collar over a piped keyhole at the front, a deep V cut-out at the back bridged by the collar and a bow at the back of the stand. Short cap sleeves. Drafted to your own measurements. Recommended fabric: dress fabrics in two colours, natural or blended fibres with added elastane.

Tech. Description

A-Line Maxi Dress with Keyhole Stand Collar and V-Back Bow

A lined women's maxi dress, fitted through the bodice and flaring to the ankle, with a stand collar over a piped keyhole at the front, a deep V cut-out at the back bridged by the collar and a bow at the back of the stand. Short cap sleeves.

When To Wear

  • For weddings, receptions and evening events.
  • For summer occasions, with sandals or heeled shoes.

Key Design Features

Silhouette: Bodice shaped with darts, skirt widening to an A-line.

Length: Ankle length.

Collar: Interfaced stand collar in two layers, fastened at the front with two buttons and rouleau loops; at the back it passes over the V cut-out and carries a bow wrapped with a narrow strap.

Neckline: Keyhole opening at the front, edged with narrow decorative piping set between the dress and the lining.

Sleeves: Short cap sleeves with a topstitched hem, set into the armhole.

Back: Two pieces with a centre back seam and darts; a deep V cut-out from the collar to about the waist; a back insert set into the skirt below it.

Closure: Invisible zip in the left side seam.

Lining: Front and back lined; the lining finishes the front keyhole, the back cut-out and the lower armholes, and is slip-stitched to the sleeve seam at the top of the armhole.

Finishing: Dress hem sewn by hand with blind stitches.

Level Of Difficulty

Intermediate. Piping set into a lined keyhole, a two-layer stand with rouleau loops, a collar that bridges an open back, a lined bodice with set-in sleeves and an invisible zip.

Fabric Recommendations

Dress fabrics in two colours, natural or blended fibres with added elastane.

Additional Supplies

  • Lining fabric
  • Invisible zip
  • Fusible interfacing (collar stand)
  • Narrow decorative piping
  • 2 buttons

Cutting Plan

From main fabric:

  • 1. Back - 2 pieces
  • 2. Back insert - 1 piece
  • 3. Front - 1 piece on fold
  • 4. Collar stand - 2 pieces
  • 5. Sleeve - 2 pieces
  • 6. Bow - 1 piece
  • 7. Bow strap - 1 piece

From lining fabric:

  • 1. Front lining - 1 piece on fold
  • 2. Back lining - 2 pieces

From fusible interfacing:

  • 1. Collar stand - 2 pieces

Sewing Instructions

  1. Fuse interfacing to the upper collar stand.
  2. Stitch darts on back pieces. Press darts towards the center back seam. Stitch darts on front pieces, press dart allowances upwards.
  3. Attach the back insert to the back. Serge/overlock seam allowances and press towards the back.
  4. Attach decorative piping along the front neckline.
  5. Stitch shoulder seams. Press seam allowances towards the back.
  6. Stitch the right side seam, press seam allowances towards the back and serge/overlock. Serge/overlock the left side seam allowances separately, stitch from the mark to the hem. Insert the zipper.
  7. Serge/overlock the lower edge of the sleeve, fold inwards and topstitch. Set the sleeve into the armhole.
  8. Stitch darts on the lining, stitch shoulder and right side seams. Serge/overlock the lower edge of the lining.
  9. Turn with lining in sequence: front neckline (decorative piping is between the front and lining), back neckline, lower of the armhole. Press the lining allowance in the upper of the armhole inwards and hand-stitch with blind stitches to the sleeve allowance.
  10. Prepare the decorative rouleau. Cut into 2 loops. Place collar stand pieces right sides together and stitch along the upper edge and corners, inserting the loops. Trim corners and turn right side out. Attach the upper collar stand to the front and back neckline. Fold the allowance of the lower collar stand inwards and topstitch into the seam of the upper collar stand attachment. Fold the allowances of the upper and lower collar stands above the back neckline inwards and sew together with blind stitches.
  11. Fold the bow lengthwise along the line right sides together and stitch along three sides, leaving a small opening. Trim corners, turn right side out through the opening. Sew up the opening and press. Serge/overlock the long sides of the bow strap, fold allowances inwards and topstitch. Wrap the bow with the strap and secure the strap allowances. Attach the bow to the collar stand.
  12. Serge/overlock the hem allowance of the dress, press to the wrong side and hand-stitch with blind stitches. Sew on buttons.

Features

Order Pattern

Standard Sizes

Pro fitIndividual figure characteristics

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?