Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4444
#4446

Pleated Neck Stand Collar Dress

Pattern #4445

A straight women's dress of knee length with raglan short sleeves, three pleats at the front neckline and a stand collar with an inverted pleat at the centre front. The front is cut in one piece on the fold, with no closure. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres.

Tech. Description

Pleated Neck Stand Collar Dress

A straight women's dress of knee length with raglan short sleeves, three pleats at the front neckline and a stand collar with an inverted pleat at the centre front. The front is cut in one piece on the fold, with no closure.

When To Wear

  • For the office and daytime in spring and summer, with low-heeled shoes or sandals.
  • Over a thin turtleneck or with tights in cooler weather.

Key Design Features

Silhouette: Straight, slightly loose through the waist and hips.

Length: Knee length.

Collar: Stand collar made of front and back sections joined into a ring, outer and inner stand stitched along the upper edge and turned; the outer stand is interfaced. An inverted pleat at the centre front forms a small V-shaped opening.

Sleeves: Short raglan sleeves, with the underarm seam sewn in one pass with the side seam, finished with a folded cuff sewn into a ring.

Front: One piece cut on the fold, with three pleats laid in at the neckline below the collar.

Back: Centre back seam and two vertical darts.

Finishing: Seams overlocked; hem overlocked, turned up and topstitched.

Level Of Difficulty

Intermediate. Raglan sleeves clipped into the corners, a pleated neckline, and a two-layer stand collar with an inverted pleat.

Fabric Recommendations

Dress fabrics of natural or blended fibres.

Additional Supplies

  • Fusible interfacing (outer stand collar)

Cutter's Must

From main fabric:

  • Back – 2 pieces
  • Front – 1 piece (on fold)
  • Sleeve – 2 pieces
  • Back Stand Collar – 2 pieces
  • Front Stand Collar – 2 pieces
  • Cuff – 2 pieces

From fusible interfacing:

  • Back Stand Collar – 1 piece
  • Front Stand Collar – 1 piece

Sewing Instructions

  1. Fuse interfacing to one Back Stand Collar and one Front Stand Collar (outer stand).
  2. Stitch the darts on the Back pieces and press the dart depths towards the center. Stitch the center back seam, press seam allowances to the left side, serge.
  3. Fold and secure pleats on the front neckline.
  4. Stitch shoulder seams, press seam allowances towards the back and serge.
  5. Stitch the Back Stand Collar and Front Stand Collar together in pairs (outer and inner stand). Place the outer and inner stands right sides together and stitch along the upper edge. Clip seam allowances at curves. Turn the collar stand right side out, straighten, press. Fold and secure the inverted pleat. Stitch the stand to the neckline.
  6. Stitch the raglan sleeves to the front and back, clipping into the corners. Clip seam allowances at curves, press towards the sleeve and serge.
  7. Stitch the underarm seams of the sleeves and the side seams in one continuous seam, press seam allowances and serge.
  8. Stitch the cuff into a loop, press seam allowances open. Press the cuff in half lengthwise, right side out. Align the cuff with the right side of the sleeve and stitch. Serge seam allowances, turn the cuff right side out.
  9. Serge the bottom edge of the garment, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?