Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4442
#4444

Jersey Tunic with Draped Collar

Pattern #4443

A hip-length women's tunic for knit fabric with a wide folded collar that drapes around the neck, front shoulder yokes and long set-in sleeves. On one side of the front, soft pleats run into a faux pocket flap fastened with three buttons. Drafted to your own measurements. Recommended fabric: knit fabric with good drape and medium stretch, in natural or blended fibres.

Tech. Description

Jersey Tunic with Draped Collar

A hip-length women's tunic for knit fabric with a wide folded collar that drapes around the neck, front shoulder yokes and long set-in sleeves. On one side of the front, soft pleats run into a faux pocket flap fastened with three buttons.

When To Wear

  • In autumn and winter with trousers, jeans or a straight skirt.
  • Under an open jacket or coat, with the collar showing at the neck.

Key Design Features

Silhouette: Close-fitting through the body, shaped with darts on the front.

Length: Below the hip.

Collar: A wide collar sewn into a ring, folded in half lengthwise and set into the neckline; it falls in soft folds around the neck.

Sleeves: Long, set into an open armhole and closed together with the side seams.

Front: Separate yokes from the neckline to the armholes. Low on one side, pleats laid along the markings gather into a vertical flap with three buttons, made as a faux pocket with an underlay piece underneath.

Back: One piece cut on the fold, with no seams.

Finishing: Seams sewn with a stretch or narrow zigzag stitch or on an overlocker; hems turned up and topstitched, a twin needle keeps them stretchy.

Level Of Difficulty

Intermediate. Easy knit construction overall, but the faux pocket flap is set into a clipped corner of the front over pleats, and the flap fold must stay clear of the side seam.

Fabric Recommendations

Knit fabric with good drape and medium stretch, in natural or blended fibres.

Additional Supplies

  • 3 buttons

Cutter's Must

  • Back – 1 piece on fold
  • Front – 1 piece
  • Yoke – 2 pieces
  • Collar – 1 piece
  • Sleeve – 2 pieces
  • Flap – 1 piece
  • Underlay Piece – 1 piece

Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlock machine.

Sewing Instructions

  1. Stitch the darts on the Front, trim the dart allowances with the overlocker. Fold and baste the pleats along the markings. Fold the Flap in half lengthwise, right side out, and press. Sew the Flap to the Front, clipping the Front into the corners. Start and end the stitching exactly on the marked pocket opening line. Press the faux pocket. Sew the Yokes to the Front. Serge the seam allowances and press them down.
  2. Place the Underlay Piece under the Flap. Serge the three inner edges of the Underlay Piece, Front and Flap together in one pass.
  3. Stitch the shoulder seams. Serge the seam allowances and press them towards the back. Stitch the Collar into a ring, press the seam allowance open. Fold the Collar in half lengthwise and press. Sew the Collar into the neckline. Serge the seam allowance.
  4. Set the Sleeves into the open armholes.
  5. Stitch the side seams together with the Sleeve seams in one go. Attention: make sure the fold of the Flap is not caught in the side seam stitching. Serge the seam allowances and press them towards the back.
  6. Serge the bottom edges of the tunic and the Sleeves. Press the hem allowances to the wrong side and topstitch.
  7. Sew the buttons onto the Flap.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?