Asymmetrical Collar Sheath Dress
A knee-length women's sheath dress with an asymmetrical wrap-over bodice and a collar cut in one with the fronts, a horizontal seam under the bust and curved side panels front and back. Short cap sleeves cut in two parts.
When To Wear
- At the office and for business meetings, on its own or under a jacket.
- For daytime events and dinners in spring and summer.
Key Design Features
Silhouette: Fitted sheath, shaped with darts on the bodice pieces and curved side panels that run from the underbust seam to the side seams.
Length: Around the knee.
Collar: Asymmetrical collar cut in one with the upper fronts; the right front laps over the left, forming a V-neck. Both fronts are finished with separate facings.
Sleeves: Short cap sleeves made of a front and a back part joined by a seam over the shoulder, set into the armhole; the armhole seam is finished with bias binding.
Closure: A concealed zip under the overlap of the right front, plus a zip in the left side seam.
Back: Upper back with darts and a neckline facing, lower back joined by a horizontal seam, and curved back side panels.
Finishing: Seams overlocked, sleeve hems topstitched, dress hem sewn by hand with blind stitches.
Level Of Difficulty
Intermediate. The shoulder seam is stitched through front, back and facing at once together with the collar corner, a zip is set between the overlapping fronts, and the armholes are bound with bias strips.
Fabric Recommendations
Dress fabrics in natural or blended fibres with added elastane.
Additional Supplies
- Concealed (invisible) zip
- Zip, 18 cm
- Fusible interfacing (front facings, back neckline facing)
- Bias binding, 4 cm wide (or cut from the dress fabric)
Cutter's Must
From main fabric:
- 1. Upper back - 1 piece
- 2. Lower back - 1 piece
- 3. Back side - 2 pieces
- 4. Right upper front – 1 piece
- 5. Left upper front – 1 piece
- 6. Lower front - 1 piece
- 7. Front side - 2 pieces
- 8. Right facing — 1 piece
- 9. Left facing — 1 piece
- 10. Back sleeve — 2 pieces
- 11. Front sleeve — 2 pieces
- 12. Back neckline facing - 1 piece
From fusible interfacing:
- 1. Right facing — 1 piece
- 2. Left facing — 1 piece
- 3. Back neckline facing - 1 piece
Sewing Instructions
- Fuse the back neckline facing and FACINGs with fusible interfacing.
- Stitch darts on back pieces. Press darts towards the center seam. Stitch darts on front pieces, press depths upwards.
- Fold the back neckline facing with the upper back, right sides together, and stitch the neckline edge. Clip seam allowances, turn the facing to the wrong side, and press.
- Fold the left upper front with the upper back, wrong sides together, along the shoulder edge. Place the facing on the front (the shoulder edge of the back is positioned between the front and the facing) and stitch the shoulder edges, simultaneously stitching the collar corner and the center edge of the left front, inserting the left zipper tape according to markings. Turn pieces to the right side, straighten, and press.
- Fold the right upper front with the upper back, wrong sides together, along the shoulder edge. Place the facing on the front (the shoulder edge of the back is positioned between the front and the facing) and stitch the shoulder edges, simultaneously stitching the collar corner and the center edge of the right front. Turn pieces to the right side, straighten, and press. Place the right front over the left, secure along the bottom edges, and topstitch along the markings to the right zipper tape.
- Stitch the upper and lower back PANELs. Press the seam downwards and overlock. Attach the back side, press seam allowances towards the side and overlock.
- Stitch the upper and lower front PANELs. Press seam allowances downwards and overlock. Attach the front side, press seam allowances towards the side and overlock.
- Stitch the right side edge, press seam allowances towards the back and overlock. Overlock the left side seam separately, stitch from the armhole to the first notch and from the second notch to the bottom. Insert the zipper.
- Stitch the upper sleeve seam, press seam allowances towards the back and overlock. Overlock the bottom edge, fold inwards and topstitch. Set the sleeve into the armhole.
- Cut (if not ready-made) bias binding 4 cm wide and a length equal to the armhole length + 5 cm. Fold the bias binding in half lengthwise, right side out, and press. Fold the trim strip with the armhole edge, right side up, and stitch. Clip seam allowances. Fold the trim strip to the wrong side and topstitch along the fold to the main piece. Press the seam.
- Overlock the hem allowance of the dress, press to the wrong side, and hem with blind stitches.