Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's fitted knit dress above the knee in two colours: the front is cut asymmetrically into curved panels, with a contrast side front and insert. Set-in three-quarter sleeves, a round neckline bound with a folded bias strip, and a centre back seam with darts. Drafted to your own measurements. Recommended fabric: dense knit fabric with medium stretch, of natural or blended fibres, in two colours.
A women's fitted knit dress above the knee in two colours: the front is cut asymmetrically into curved panels, with a contrast side front and inset. Set-in three-quarter sleeves, a round neckline bound with a folded bias strip, and a centre back seam with darts.
Silhouette: Fitted, straight skirt; for knit fabric with medium stretch, pulled on without a fastening.
Length: Just above the knee, hem turned up 2 cm and topstitched.
Neckline: Round, finished with a 4 cm bias binding folded in half, stitched to the right side, turned to the inside and topstitched along the fold.
Sleeves: Three-quarter length, set-in.
Front: Asymmetric, built from a centre front, a lower front, a side and, in the second colour, a side front and a front inset; the curved seams run from the shoulders and armholes down to the hem.
Back: Two pieces with a centre back seam and waist darts.
Finishing: Seams sewn with a stretch or narrow zigzag stitch or on a 3- or 4-thread overlocker; hems topstitched with a twin needle.
Intermediate. Long curved seams to match in a knit fabric without stretching them, and a bias-bound neckline.
Dense knit fabric with medium stretch, of natural or blended fibres, in two colours.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 0.7 cm. Hem allowance of the garment – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match!
From main fabric (first colour):
From main fabric (second colour):
Tip: Cut pieces from knit fabrics should be sewn with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.8 cm. The hem allowance should be topstitched with a twin needle to maintain elasticity. Alternatively, pieces can be sewn directly on a 3- or 4-thread overlock machine.

#4442
Asymmetrical Notched Collar Cap Sleeve Sheath Dress
#4444
A-Line Maxi Dress with Keyhole Stand Collar and V-Back Bow
#4437
Fitted Collared Dress with Sleeves

#4445
Pleated Neck Stand Collar Dress

#4436
Fitted V-Neck Dress Draped Waist

#4446
Fitted Bodice Gathered Skirt Puff Sleeve Dress
#4447
Sheath Dress Contrast V-Yoke

#4432
A-Line Dress with V-Notch Neck and Contrast Trim

Minerva Support
Online