Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4433
#4435

Pleated Blouse with Flutter Sleeves

Pattern #4434

A women's hip-length blouse with a round neckline, a separate centre-front panel folded into two pressed pleats, short flutter sleeves and a double-layer band at the hem. Drafted to your own measurements. Recommended fabric: thin blouse fabric of natural or blended fibres.

Tech. Description

Pleated Blouse with Flutter Sleeves

A women's hip-length blouse with a round neckline, a separate centre-front panel folded into two pressed pleats, short flutter sleeves and a double-layer band at the hem.

When To Wear

  • In summer, worn over skirts and trousers for the office: the hem band sits at the hip.
  • With jeans or a pencil skirt for everyday wear on warm days.

Key Design Features

Silhouette: Straight body that blouses slightly over the hem band; side bust darts on the fronts.

Length: Hip length.

Neckline: Round neckline without a collar, finished with front and back facings that are understitched 0.1 cm from the seam.

Sleeves: Short flutter sleeves set into the armhole; the lower edge is finished with a narrow rolled hem or a fine overlock stitch.

Front: Two front pieces joined by a separate pleat panel; the pleats are folded along the markings and the inner folds are edge-stitched 0.1 cm from the fold. No fastenings: the blouse goes on over the head.

Back: One piece, without seams or darts.

Finishing: A folded hem band, cut as front and back pieces, is attached to the lower edge and stitched in the ditch from the inside. Shoulder and side seams are pressed towards the back and overlocked.

Level Of Difficulty

Beginner. Few pieces and no fastenings; the care goes into folding the pleats evenly along the markings and rolling the sleeve hem.

Fabric Recommendations

Thin blouse fabric of natural or blended fibres.

Additional Supplies

  • Fusible interfacing (neckline facings)

Cutter's Must

From main fabric:

  • 1. Back – 1 piece
  • 2. Front – 2 pieces
  • 3. Pleat – 1 piece
  • 4. Sleeve – 2 pieces
  • 5. Back Placket (hem band) – 1 piece
  • 6. Front Placket (hem band) – 1 piece
  • 7. Back Neckline Facing – 1 piece
  • 8. Front Neckline Facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the Back Neckline Facing and the Front Neckline Facing.
  2. Stitch the darts on the Front pieces and press them upwards.
  3. Stitch the Pleat piece to the Front pieces, press the seam allowances and serge them. Fold and press the pleats along the markings. Edge-stitch the inner folds 0.1 cm from the fold. Baste the pleats in place along the neckline edge and the lower edge.
  4. Stitch the shoulder and side seams, press the seam allowances towards the back and serge.
  5. Join the Front Neckline Facing and the Back Neckline Facing at their side edges and press the seam allowances open. Serge the outer edge. Place the facing on the blouse, right sides together, and stitch around the neckline. Clip the seam allowances on the curves and turn the facing to the wrong side. Understitch the seam allowances to the facing 0.1 cm from the seam.
  6. Finish the lower edge of the Sleeve with a narrow double-folded hem, or with a fine rolled overlock edge (in this case, trim off the sleeve hem allowance first). Stitch the sleeve to the armhole edge, press the seam allowances towards the armhole and serge.
  7. Stitch the Back Placket and Front Placket together into a band and press the seam allowances open. Fold the band lengthwise in half, wrong sides together, and press. Stitch the outer layer of the band to the lower edge of the blouse and press the seam allowances towards the band. Press the raw edge of the inner layer to the wrong side and stitch it in the ditch of the band seam.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?