Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4429
#4431

Two-Tone Overlay Dress with Back Tab

Pattern #4430

A fitted women's dress of knee length with a contrast inset behind an open centre front, a buttoned tab across the top of the opening, three-quarter sleeves with contrast cuffs and a round neckline finished with facings. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres, with a contrast-colour fabric for the trim (front inset and cuffs).

Tech. Description

Two-Tone Overlay Dress

A fitted women's dress of knee length with a contrast inset behind an open centre front, a buttoned tab across the top of the opening, three-quarter sleeves with contrast cuffs and a round neckline finished with facings.

When To Wear

  • For the office and daytime in spring and autumn, with pumps or ankle boots.
  • With tights and a short jacket in cooler weather.

Key Design Features

Silhouette: Fitted, shaped with bust darts on the front and waist darts on the back.

Length: Knee length.

Neckline: Round, finished with interfaced front and back neckline facings tacked to the shoulder seams.

Sleeves: Three-quarter set-in sleeves with a cut-on facing and a folded cuff in contrast fabric.

Front: Two front pieces joined at the centre from the neckline to a mark; below it the fronts part over a contrast inset, which is hemmed separately with blind stitches. The cut-on front facings are topstitched through the inset seam. A tab across the top of the opening is held by 2 buttons.

Back: One piece cut on the fold, with waist darts and shoulder darts.

Finishing: Seams overlocked; hem allowance 3 cm, sewn by hand with blind stitches.

Level Of Difficulty

Intermediate. A centre front opening with an inset and cut-on facings, folded cuffs with cut-on sleeve facings, neckline facings and hand-finished hems.

Fabric Recommendations

Dress fabrics of natural or blended fibres, with a contrast-colour fabric for the trim (front inset and cuffs).

Additional Supplies

  • Contrast fabric for the front inset and cuffs
  • Fusible interfacing (front and back neckline facings)
  • 2 buttons

Cutter's Must

From main fabric:

  • Back – 1 piece on fold
  • Front – 2 pieces
  • Sleeve – 2 pieces
  • Tab – 1 piece
  • Front Neckline Facing – 1 piece
  • Back Neckline Facing – 1 piece

From contrast fabric:

  • Front Inset – 1 piece
  • Cuff – 2 pieces

From fusible interfacing:

  • Front Neckline Facing – 1 piece
  • Back Neckline Facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the Front Neckline Facing and Back Neckline Facing.
  2. Stitch the waist and shoulder darts on the back. Press the dart takes towards the centre. Stitch the bust darts on the front, press the dart takes upwards.
  3. Overlock the bottom edge of the Front Inset, press to the wrong side and hem with blind stitches. Stitch the Front Inset to the front, press seam allowances towards the front and overlock. Fold the front pieces right sides together, align along the center lines, folding back the insert, and stitch from the neckline edge to the mark. Unfold the resulting pleat and secure along the neckline edge.
  4. Stitch the side and shoulder edges, press seam allowances towards the back and overlock.
  5. Stitch the shoulder seams of the neckline facings, overlock the outer edge. Place the dress with the facing right sides together, aligning the neckline edges, and stitch. Clip seam allowances at curves, turn the facing to the wrong side and press. Attach the facing to the shoulder seams.
  6. Stitch the cuff into a loop, press seam allowances open. Fold the cuff in half lengthwise, right side out, and press. Stitch the sleeve edge, press seam allowances and overlock. Attach the cuff to the sleeve, placing it with the right side of the sleeve, press seam allowances and overlock. Fold the grown-on sleeve facing to the wrong side and topstitch onto the sleeve in the cuff attachment seam.
  7. Set the sleeves into the armholes, aligning the notches. Press seam allowances and overlock.
  8. Overlock the bottom edge of the dress, stitch the corners of the front. Press the hem allowance to the wrong side and hem with blind stitches. Topstitch the grown-on front facing to the front through the inset attaching seam.
  9. Fold the Tab in half lengthwise, right sides together, and stitch, leaving an opening for turning. Trim the allowances at the corners, turn right side out, and press. Place the Tab across the top of the front opening and secure it with the 2 buttons.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?