Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4423
#4425

Paneled Back Button Blouse with Contrast Bow

Pattern #4424

A fitted women's blouse of hip length with princess seams front and back, a cut-on button placket at the centre back with 7 buttons, short tulip sleeves of two overlapping parts and a contrast bow over a slit in the left front panel seam. Neckline, hem and sleeve edges are bound with contrast bias tape. Drafted to your own measurements. Recommended fabric: blouse fabric of natural or blended fibres, with a contrast fabric for the bow and strap.

Tech. Description

Paneled Back Button Blouse with Contrast Bow

A fitted women's blouse of hip length with princess seams front and back, a cut-on button placket at the centre back with 7 buttons, short tulip sleeves of two overlapping parts and a contrast bow over a slit in the left front panel seam. Neckline, hem and sleeve edges are bound with contrast bias tape.

When To Wear

  • For the office in spring and summer, worn untucked over a pencil skirt or straight trousers.
  • With jeans or a skirt for daytime wear.

Key Design Features

Silhouette: Fitted, shaped by princess seams from the shoulder on the front and back.

Length: Hip length.

Neckline: Round, bound with contrast bias tape (no seam allowance on the neckline).

Sleeves: Short tulip sleeves: back and front sleeve parts with bound lower edges overlap at the marks and are joined along the cap before setting in.

Front: Centre front with separate left and right side fronts; the left panel seam is left open below a mark to form a bound slit at the hem, with a bow of contrast fabric wrapped by a strap stitched above it.

Closure: Centre back opening with a cut-on placket, buttonholes on the right side and 7 buttons on the left.

Back: Two centre back pieces and side backs joined by princess seams.

Finishing: Hem bound with bias tape (no hem allowance); seams overlocked.

Level Of Difficulty

Intermediate. Binding curved edges with bias tape, a slit worked into a panel seam, overlapping tulip sleeves, a cut-on placket with buttonholes and a made-up bow.

Fabric Recommendations

Blouse fabric of natural or blended fibres, with a contrast fabric for the bow and strap.

Additional Supplies

  • Contrast fabric for the bow and strap
  • Contrast bias tape (approximate length marked on the front pattern piece and on the back sleeve pattern piece)
  • 7 buttons

Cutter's Must

From main fabric:

  • Center Back – 2 pieces
  • Side Back – 2 pieces
  • Side Left Front – 1 piece
  • Side Right Front – 1 piece
  • Center Front – 1 piece
  • Back Sleeve – 2 pieces
  • Front Sleeve – 2 pieces

From contrast fabric:

  • Bow – 1 piece
  • Strap – 1 piece

Sewing Instructions

  1. Stitch the panel seams on the back (Center Back to Side Back), press seam allowances towards the center and overlock.
  2. Stitch the right panel seam of the front (Center Front to Side Right Front), press seam allowances towards the center and overlock.
  3. Stitch the side and shoulder seams, press seam allowances towards the back and overlock.
  4. Bind the bottom edge of the garment up to the mark on the panel seam of the front. Stitch the left panel seam of the front (Center Front to Side Left Front) above the mark, press seam allowances towards the center and overlock.
  5. Bind the neckline edge. Press the cut-on placket of the Center Back to the wrong side, fold the edge 1 cm inwards and topstitch.
  6. Stitch the underarm seams of the sleeve parts, press the seam allowances and overlock. Bind the lower edges of the sleeve. Place the Back Sleeve over the Front Sleeve, aligning the notches, and secure along the top edge. Set the sleeves into the armholes, press seam allowances and overlock.
  7. On the right placket, make buttonholes; on the left, sew on buttons.
  8. Fold the Strap in half lengthwise, right sides together, and stitch along the long side. Turn right side out, centering the seam, and overlock the short sides. Fold the Bow in half lengthwise, right sides together, and stitch along three sides, leaving an opening for turning. Trim seam allowances and turn right side out. Close the opening with invisible stitches. Form the bow, wrap the Strap around its center, and stitch the bow onto the blouse as shown in the technical drawing.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?