Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4422
#4424

Fitted High Collar Asymmetrical Scalloped Jacket

Pattern #4423

A women's fitted, fully lined jacket with an off-centre button closure along a scalloped front edge, a high stand collar, princess seams front and back, and pockets set into the front princess seams. A decorative ornament is sewn onto the collar. Drafted to your own measurements. Recommended fabric: suiting fabrics of natural or blended fibres.

Tech. Description

Fitted High Collar Asymmetrical Scalloped Jacket

A women's fitted, fully lined jacket with an off-centre button closure along a scalloped front edge, a high stand collar, princess seams front and back, and pockets set into the front princess seams. A decorative ornament is sewn onto the collar.

When To Wear

  • In autumn and spring as outerwear over a fine knit or blouse.
  • With a pencil skirt, a dress or trousers for work and daytime events.

Key Design Features

Silhouette: Fitted at the waist by princess seams on the fronts and back.

Length: Hip length.

Collar: High stand collar of two layers, the outer one sewn to the jacket neckline and the inner one to the facings; it stands away from the neck and follows the asymmetric front. A decorative ornament is sewn on at the front of the collar.

Sleeves: Long two-piece set-in sleeves with elbow and front seams.

Closure: Asymmetric, off-centre front with a scalloped edge, fastened with buttons and buttonholes. The right and left centre fronts are cut separately, each with its own facing.

Pockets: In-seam pockets in the front princess seams, with interfaced openings.

Back: Centre back seam, princess seams from the armholes and darts.

Finishing: Front facings and back neck facing interfaced; shoulder pads; jacket and sleeve hems turned up 3 cm.

Lining: Full lining, including the sleeves; pocket bags cut from lining.

Level Of Difficulty

Advanced. A scalloped front edge sewn with a facing, an asymmetric closure, a two-layer stand collar, in-seam pockets in princess seams, two-piece sleeves, a full lining.

Fabric Recommendations

Suiting fabrics of natural or blended fibres.

Additional Supplies

  • Lining fabric
  • Fusible interfacing
  • 6 buttons
  • Shoulder pads
  • Decorative ornament for the collar

Cutter's Must

From main fabric:

  • Center back – 2 pieces
  • Side back – 2 pieces
  • Center right front – 1 piece
  • Side front – 2 pieces
  • Center left front — 1 piece
  • Collar Stand – 2 pieces
  • Upper sleeve – 2 pieces
  • Lower sleeve – 2 pieces
  • Back neckline facing – 1 piece
  • Right front facing – 1 piece
  • Left front facing — 1 piece

From lining fabric:

  • Center back – 2 pieces
  • Right front lining – 1 piece
  • Left front lining – 1 piece
  • Side back – 2 pieces
  • Side front – 2 pieces
  • Upper sleeve – 2 pieces
  • Lower sleeve – 2 pieces
  • Pocket bag — 4 pieces

From fusible interfacing:

  • Right front facing – 1 piece
  • Left front facing — 1 piece
  • Back neckline facing — 1 piece

Sewing Instructions

  1. Fuse fusible interfacing to relevant pieces, as well as the pocket opening seam allowances.
  2. On the back, stitch darts. Press dart folds towards the center. On the back, stitch princess seams. Press seam allowances open. Stitch the center back seam. Press seam allowances open.
  3. Attach pocket bag to the center front PANELs and side front PANELs accordingly. On the front, stitch princess seams, simultaneously stitching the pocket bag. Press seam allowances open, clipping the corner on the side front. Press pocket towards the center.
  4. Stitch and press open the side and shoulder seams of the jacket.
  5. Stitch the elbow seam of the sleeve. Press seam allowances open. Stitch the front seam of the sleeve. Set in sleeves into the jacket. Attach shoulder pads.
  6. Attach the outer collar stand to the neckline. Clip and press seam allowances open.
  7. Stitch the shoulder seams of the facings and facing. Press seam allowances open. Attach the inner collar stand to the neckline. Clip and press seam allowances open. On the lining fabric pieces, stitch seams, leaving an opening in the left side seam. Set in sleeves.
  8. Place the facing on the right side of the front, right side down, and stitch along the front edge, simultaneously stitching the collar. Start and end the stitching strictly at the marked hemline. Turn pieces right side out and press. Secure the neckline and collar stand seam allowances. Attach the lining to the facings and facing. Attach the lower edge of the lining to the lower edge. Attach the lining to the bottom of the sleeve.
  9. Make buttonholes and sew on buttons. Attach a decorative embellishment to the collar.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?