Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4417
#4420

Princess Seam Top with Asymmetric Pleats

Pattern #4419

A fitted women's top with a V-neckline, princess seams on the front and back, and an asymmetric lower front with pleats that fan out towards a longer, flared hem on one side. Three-quarter set-in sleeves gathered at the cap; invisible zipper at the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres.

Tech. Description

Princess Seam Top with Asymmetric Pleats

A fitted women's top with a V-neckline, princess seams on the front and back, and an asymmetric lower front with pleats that fan out towards a longer, flared hem on one side. Three-quarter set-in sleeves gathered at the cap; invisible zipper at the centre back.

When To Wear

  • At the office with straight trousers or a pencil skirt.
  • For dinners and evening events in spring and autumn.

Key Design Features

Silhouette: Fitted through the bodice by princess seams, flaring below the waist at the pleated lower front.

Length: Below the hip, with an asymmetric hem that drops lower on one side at the front and slopes at the back.

Neckline: V-neckline with a centre front seam. The centre front is lined with self fabric; the back neckline is finished with an interfaced facing.

Sleeves: Three-quarter length, set-in, with the cap gathered between the marks; hems turned up and topstitched.

Front: Centre front in two halves, with separate left and right side fronts that differ in shape. A one-piece lower front is joined to the upper front; its pleats are stitched along the marks and pressed upwards.

Back: Princess seams on both sides and a centre back seam; left and right back pieces are cut separately for the asymmetric hem.

Closure: Invisible zipper in the centre back seam.

Finishing: Seams serged; hem pressed up and topstitched.

Level Of Difficulty

Intermediate. Asymmetric pieces cut singly, stitched pleats joined into a seam, a lined V-neckline, an invisible zipper and gathered set-in sleeves.

Fabric Recommendations

Dress fabrics made from natural or blended fibres.

Additional Supplies

  • Invisible zipper
  • Fusible interfacing (back neckline facings)

Cutter's Must

From main fabric:

  • Left Side Back – 1 piece
  • Right Side Back – 1 piece
  • Left Center Back – 1 piece
  • Right Center Back – 1 piece
  • Center Front – 2 pieces
  • Right Side Front – 1 piece
  • Left Side Front – 1 piece
  • Lower Front – 1 piece
  • Back Neckline Facing – 2 pieces
  • Sleeve – 2 pieces
  • Center Front Lining 1 – 2 pieces

From fusible interfacing:

  • Back Neckline Facing – 2 pieces

Center Front Lining 1 is cut from the main fabric.

Sewing Instructions

  1. Fuse interfacing to the Back Neckline Facings.
  2. Stitch the princess seams of the back (Center Back to Side Back), serge the seam allowances and press them towards the center. Serge the center seams of the back separately. Stitch the center seam of the back from the zipper mark to the lower edge, press the seam allowances open. Insert the zipper.
  3. Stitch the shoulder seams. Serge the seam allowances and press them towards the back.
  4. Serge the outer edges of the Back Neckline Facings. Stitch the shoulder seams of the Center Front Lining 1 and the Back Neckline Facings. Press the seam allowances open. Place the facings and lining on the neckline, right sides together, and stitch. Clip the seam allowance at the corner and curves. Turn the lining to the wrong side and press. From now on, treat the Center Front and its lining as one piece.
  5. Stitch the princess seams on the front (Center Front to Right Side Front and Left Side Front). Serge the seam allowances and press them towards the center.
  6. On the Lower Front, stitch the pleats along the marks. Press the pleats upwards. Baste the upper pleat along the side edge. Trim off any excess.
  7. Stitch the Lower Front to the upper front. Serge the seam allowance and press it upwards.
  8. Stitch the side seams. Serge the seam allowances and press them towards the back.
  9. Along the top of the sleeve cap between the marks, sew a line of long stitches with loose upper tension and gather. Stitch the sleeve seam. Serge the seam allowance. Set the sleeve into the armhole. Serge the seam allowance.
  10. Serge the lower edge of the garment and sleeve, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?