Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4409
#4411

Collared Dress with Cuffs, Back Zip and Decorative Flaps

Pattern #4410

A knee-length women's dress with princess seams, a topstitched box pleat down the centre front, a shirt collar on a stand, elbow-length sleeves with buttoned turn-back cuffs, and buttoned flaps on the side fronts. Zipper at the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres with added elastane.

Tech. Description

Collared Dress with Cuffs, Back Zip and Decorative Flaps

A knee-length women's dress with princess seams, a topstitched box pleat down the centre front, a shirt collar on a stand, elbow-length sleeves with buttoned turn-back cuffs, and buttoned flaps on the side fronts. Zipper at the centre back.

When To Wear

  • At the office, on its own or under a jacket.
  • Everyday wear in spring and autumn, with tights and low shoes or boots.

Key Design Features

Silhouette: Semi-fitted, shaped by princess seams on the front and back.

Length: Knee length.

Collar: Shirt collar with a centre seam, set on a stand; the collar ends are tucked under the front pleat, and a hook and loop close it at the collar-stand seam.

Sleeves: Elbow-length set-in sleeves with eased caps and two-layer cuffs turned back to the right side, each held by a button sewn through.

Front: Centre front box pleat with both folds edge-stitched; no front opening.

Pockets: Interfaced flaps with a rounded edge on the side fronts, topstitched 0.7 cm from the attaching seam and buttoned through to the dress.

Back: Princess seams and a centre back seam with a zipper.

Finishing: Hem turned up and topstitched.

Level Of Difficulty

Intermediate. Collar on a stand, a topstitched box pleat, princess seams, a centre back zipper, and turn-back cuffs.

Fabric Recommendations

Dress fabrics made from natural or blended fibres with added elastane.

Additional Supplies

  • Fusible interfacing (flaps, stand, collar, cuffs)
  • Zipper
  • 8 buttons
  • Hook and loop

Cutter's Must

From main fabric:

  • Back center – 2 pieces
  • Back side – 2 pieces
  • Front side – 2 pieces
  • Front center – 1 piece
  • Flap – 4 pieces
  • Stand – 2 pieces
  • Collar – 4 pieces
  • Sleeve – 2 pieces
  • Cuff – 4 pieces

From fusible interfacing:

  • Flap – 2 pieces
  • Stand – 1 piece
  • Collar – 2 pieces
  • Cuff – 2 pieces

Sewing Instructions

  1. Fuse fusible interfacing to the designated pieces.
  2. Stitch the princess seam allowances of the back, press seam allowances towards the center and overlock. Overlock the center seam allowances of the back separately on each piece. Stitch the center seam allowances of the back from the zipper mark to the bottom, press seam allowances open. Insert the zipper.
  3. Create a box pleat on the front, topstitch the outer and inner folds 1 mm from the edge. Stitch the princess seam allowances of the front, press seam allowances towards the center and overlock.
  4. Stitch the side and shoulder seam allowances. Press seam allowances towards the back and overlock.
  5. Place the upper collar and lower collar right sides together. Stitch the center seam allowances, ends, and outer edge of the collar. Trim seam allowances. Turn the collar right side out, shape, and press. Place the stand pieces right sides together, insert the prepared collar between them, align the notches, and stitch, simultaneously stitching the ends of the stand. Start and end the stitching precisely at the marked line of the stand insertion seam. Turn the prepared collar right side out and press.
  6. Insert the outer stand with the collar into the neckline, turn under the open edge of the inner stand, and topstitch into the insertion seam. Turn the collar ends under the pleat and secure. Sew a hook to one side of the collar and stand seam, and a loop to the other.
  7. Place the flap pieces right sides together and stitch along the outer contour. Clip the seam allowances at the curves, turn the flap right side out. Shape the seams and press. Overlock the upper edge.
  8. Place the flap onto the side front (rounded edge facing up) and attach. Turn the flap down and topstitch 0.7 cm from the attachment seam.
  9. Stitch the sleeve seam allowances. Press seam allowances and overlock. Insert the sleeves into the armholes, aligning the notches and easing the cap. Press seam allowances and overlock.
  10. Place the cuffs in pairs right sides together and stitch the outer edge. Turn right side out, shape, press. Insert the cuff into the sleeve and attach to the lower edge. Overlock seam allowances. Turn the cuff right side out.
  11. Overlock the bottom edge of the garment. Press the hem allowance to the wrong side and topstitch.
  12. Sew buttons onto the flaps and cuffs through the garment.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?