Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4374
#4376

Puffed Sleeve Paneled Dress with Front Folds

Pattern #4375

A women's sheath dress about knee length, sewn in two coordinating colours, with a curved insert under the bust, princess seams, two inverted pleats at the front neckline and short two-piece sleeves gathered into a puff. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres, in two coordinating colours.

Tech. Description

Puffed Sleeve Paneled Dress with Front Folds

A women's sheath dress about knee length, sewn in two coordinating colours, with a curved insert under the bust, princess seams, two inverted pleats at the front neckline and short two-piece sleeves gathered into a puff.

When To Wear

  • At the office and for daytime events, spring to autumn.
  • With a jacket or cardigan in cooler weather.

Key Design Features

Silhouette: Fitted sheath shaped by the curved under-bust insert, side front panels and back princess seams.

Length: About knee length.

Neckline: Wide rounded neckline with two inverted pleats at the centre front; finished with interfaced facings.

Sleeves: Short, in two parts: the upper part gathered between notches for the puff, the lower part in the second colour.

Front: Upper centre front, under-bust insert and lower centre front (cut on the fold), with side front panels. In colour 1: centre front pieces; in colour 2: insert and side panels.

Back: Princess seams, with side back panels in the second colour; centre back seam with a vent at the hem.

Closure: Invisible zip in the centre back seam.

Finishing: Vent interfaced and topstitched across the top; hem 2 cm, turned and topstitched.

Level Of Difficulty

Intermediate. A curved insert seam, a back vent combined with a zip in the same seam, and gathered two-piece sleeves.

Fabric Recommendations

Dress fabrics of natural or blended fibres, in two coordinating colours.

Additional Supplies

  • Invisible zip
  • Fusible interfacing (neckline facings, back vent)

Cutter's Must

From main fabric 1:

  • 1. Center upper front - 1 piece
  • 2. Center lower front - 1 piece on fold
  • 3. Center back — 2 pieces
  • 4. Upper sleeve – 2 pieces
  • 5. Front neckline facing — 1 piece
  • 6. Back neckline facing — 2 pieces

From main fabric 2:

  • 1. Front insert — 1 piece
  • 2. Front side - 2 pieces
  • 3. Back side — 2 pieces
  • 4. Lower sleeve — 2 pieces

Sewing Instructions

  1. Fuse fusible interfacing to the back and front facings.
  2. Stitch the princess seams of the back. Press seam allowances towards the center. On both back pieces, fuse the vent from the wrong side. On the right side, mark the center seam line (vent fold line). Overlock the center seam allowance simultaneously with the vent edge. Stitch the center seam of the back from the zipper mark to the vent corner. Clip the vent seam allowance corner. Press the center seam allowance and vent to the left side. Press the right side of the vent 1 cm to the wrong side and topstitch. Topstitch the vent seam allowances along the top with a machine stitch. Insert the zipper.
  3. Attach the front insert to the lower front. Overlock the seam allowance and press upwards. Attach the upper front to the insert. Overlock the seam allowance and press onto the insert. Attach the front side. Overlock the seam allowance and press towards the center.
  4. Stitch the shoulder seams and side seams, overlock the seam allowances and press towards the back.
  5. On the upper sleeve, between the notches, stitch with loosely tensioned stitches and gather. Stitch the upper and lower sleeve parts. Overlock the seam allowance. Overlock the hem allowance, fold inwards and topstitch. Stitch the sleeve seam. Overlock the seam allowance and press towards the back. Set the sleeve into the armhole. Overlock the seam allowance.
  6. Form two inverted pleats on the front neckline and secure along the upper edge.
  7. Stitch the shoulder seams of the neckline facings. Press seam allowances open. Overlock the outer edge of the facings. Place the facing onto the neckline and stitch. Clip the seam allowances, turn the facing out and press. Secure the facing to the shoulder seams and the zipper tape.
  8. Overlock the dress hem allowance, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?