Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4375
#4377

Pencil Skirt With Yoked Paneled Front

Pattern #4376

A women's knee-length pencil skirt with a shaped yoke instead of a waistband, a front cut in panels with curved seams, and a centre back zip above a back vent. All front seams are topstitched 0.7 cm from the seam. Drafted to your own measurements. Recommended fabric: suiting fabrics of natural or blended fibres.

Tech. Description

Pencil Skirt With Yoked Paneled Front

A women's knee-length pencil skirt with a shaped yoke instead of a waistband, a front cut in panels with curved seams, and a centre back zip above a back vent. All front seams are topstitched 0.7 cm from the seam.

When To Wear

  • To the office with a blouse or fitted knit top and a jacket.
  • In autumn, winter and spring in suiting fabric, with tights and heeled shoes or boots.
  • With a belt threaded through the belt loops at the yoke.

Key Design Features

Silhouette: Fitted pencil skirt, straight from hip to hem.

Length: About knee length.

Waist: No waistband. The top is a shaped yoke: centre front yoke, two side front yokes and two back yokes, faced on the inside with an interfaced inner yoke; the top edge is understitched 0.2 cm from the seam. Four belt loops, two at the front and two at the back.

Front: A centre front panel with side front panels and side pieces, joined by curved seams running from the yoke to the hem. Yoke and panel seams topstitched 0.7 cm from the seam.

Back: Two back halves with darts under the yoke, a centre back seam, a concealed zip at the top and a vent at the hem.

Finishing: Hem pressed up and sewn by hand with blind stitches.

Level Of Difficulty

Intermediate. Many curved panel seams with even topstitching, a faced yoke finished at the zip, a concealed zip and a back vent.

Fabric Recommendations

Suiting fabrics of natural or blended fibres.

Additional Supplies

  • Fusible interfacing (back yokes, inner front yoke)
  • Concealed zip

Cutter's Must

From main fabric:

  • 1. Back Yoke – 4 pieces
  • 2. Back Skirt Half – 2 pieces
  • 3. Center Front Yoke - 1 piece
  • 4. Side Front Yoke - 2 pieces
  • 5. Front Skirt Half – 1 piece
  • 6. Side - 2 pieces
  • 7. Side Front – 2 pieces
  • 8. Inner Front Yoke - 1 piece
  • 9. Belt loop strip – 1 piece

From fusible interfacing:

  • 1. Back Yoke – 2 pieces
  • 2. Inner Front Yoke - 1 piece

Sewing Instructions

  1. Fuse interfacing to the pattern pieces.
  2. Stitch darts on the back skirt halves. Press the dart folds towards the center. Attach the outer back yokes to the back skirt halves, press seam allowances upwards.
  3. Overlock the center edges of the back skirt half separately on each piece, simultaneously overlocking the vent. Stitch the center edge from the zipper mark to the edge of the vent. Press seam allowances open, pressing the slit for the fastener, press vent allowances towards the left side edge. Press the right side of the vent by 1 cm. Secure vent allowances with machine stitching. Insert the zipper.
  4. Stitch the side front yoke to the side, press seam allowances upwards and topstitch along the seam at 0.7 cm. Stitch the center front yoke to the front skirt half, press seam allowances upwards and topstitch along the seam at 0.7 cm.
  5. Attach the side to the front skirt half, press seam allowances towards the center and topstitch along the seam at 0.7 cm. Stitch the princess seams of the front skirt half, press seam allowances towards the side and topstitch along the seam at 0.7 cm.
  6. Stitch the side seams, press seam allowances towards the back and overlock.
  7. Stitch the side seams of the inner yokes. Overlock the bottom edge. Place the yoke with the skirt right sides together and stitch the top edge. Topstitch the seam allowances to the inner yoke at a distance of 0.2 cm from the stitching line. Turn the FACINGs to the wrong side, press. Fold the center edges of the inner yoke and sew to the zipper tape. Topstitch the inner yoke into the seam of the outer yoke attachment.
  8. Overlock the bottom edge of the garment, press to the wrong side and hem with blind stitches.
  9. Overlock one long side of the belt loop. Fold the unoverlocked edge inwards and cover with the overlocked edge. Topstitch at 0.1 cm from the edge. Cut the belt loops. Attach the belt loops to the skirt.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Additional options

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?