Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4347
#4349

Fitted Collared Dress with Flounce

Pattern #4348

A women's sleeveless knee-length sheath dress with a waist seam, a wide folded collar, pleats at the front neckline and a lined asymmetric pleated flounce sewn into the front waist seam. Lined bodice, invisible zipper at the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics from natural or blended fibres.

Tech. Description

Fitted Collared Dress with Flounce

A women's sleeveless knee-length sheath dress with a waist seam, a wide folded collar, pleats at the front neckline and a lined asymmetric pleated flounce sewn into the front waist seam. Lined bodice, invisible zipper at the centre back.

When To Wear

  • For the office and business meetings, with a jacket or cardigan over it in cooler weather.
  • For daytime celebrations and dinners, worn with a belt at the waist seam.

Key Design Features

Silhouette: Fitted, shaped by waist darts on the front and back, with a straight skirt.

Length: Knee length.

Collar: Wide one-piece collar folded in half lengthwise, set into the neckline between the dress and the lining, fastened at the back with a hook and eye on the under collar.

Sleeves: Sleeveless; armholes finished with the bodice lining.

Front: Pleats stitched at the neckline of the upper front, two on each side, with waist darts below; one-piece lower front.

Waist: Waist seam all round. An asymmetric flounce with pressed pleats is laid on the lower front and caught into the waist and side seams.

Back: Centre back seam from neckline to hem, waist darts in the upper and lower back.

Closure: Invisible zipper in the centre back seam; hook and eye on the collar.

Finishing: Hem turned up and sewn by hand with blind stitches.

Lining: Bodice lining with darts, sewn to the neckline and armholes, attached to the zipper tape and secured at the waist seam; the flounce is lined in full.

Level Of Difficulty

Intermediate. A collar set between the dress and the lining, an invisible zipper with lining, armholes faced with lining in two steps, a lined pleated flounce.

Fabric Recommendations

Dress fabrics from natural or blended fibres. Recommended: wear with a belt.

Additional Supplies

  • Lining fabric
  • Invisible zipper
  • Hook and eye

Cutter's Must

From main fabric:

  • Upper back - 2 pieces
  • Lower back - 2 pieces
  • Upper front – 1 piece
  • Lower front - 1 piece
  • Flounce – 1 piece
  • Collar - 1 piece

From lining fabric:

  • Upper back - 2 pieces
  • Front lining – 1 piece
  • Flounce – 1 piece

Sewing Instructions

  1. Stitch the waist darts on the back and front pieces. Press the dart depths towards the center. Stitch the pleats on the upper front, press the depths away from the center.
  2. Stitch the upper and lower back pieces together. Overlock the seam allowances and press them upwards.
  3. Overlock the center back seam separately on each piece. Stitch the center back seam from the zipper mark downwards. Press the seam allowances open, pressing the slit for the zipper. Insert the zipper.
  4. Fold the flounce with the lining, right sides together, and stitch the lower edge. Clip the seam allowances at the curves. Turn the piece right side out and press. Press the pleats according to the markings. Place the flounce on the lower front and secure it along the upper and side edges.
  5. Stitch the upper and lower front pieces together. Press the seam allowances upwards and overlock them.
  6. Stitch the side and shoulder seams. Press the seam allowances towards the back and overlock them.
  7. Fold the collar piece in half lengthwise, right sides together, and stitch the ends. Trim the seam allowances at the corners, turn the collar right side out, and press. Attach the collar to the neckline.
  8. On the lining pieces, stitch and press the darts. Stitch the shoulder and side seams, pressing the seam allowances towards the back. Overlock the lower and center edges. Fold the lining with the neckline, right sides together (the collar is positioned between the main fabric and the lining). Fold back the lining 5 mm from the edges of the concealed fastener and pin it to the upper edge of the dress. On the right side of the dress, fold back the seam allowances along the zipper and pin them to the neckline edge over the lining. Stitch the neckline edge, clip the seam allowances at the curves. Turn the piece right side out and press. Attach the lining to the armhole in two steps: first the front, then the back. Clip the seam allowances at the curves, press. Turn under the center edge of the lining and attach it to the zipper tape. Secure the lining to the garment at the waist seam.
  9. Overlock the hem allowance of the dress, press it to the wrong side, and hem with blind stitches.
  10. Sew a hook and eye to the lower collar, 1 cm from the collar attachment seam. Tip: The dress is recommended to be worn with a belt.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?