Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4346
#4348

Sleeveless Sheath Dress with Chevron Front Insets

Pattern #4347

A sleeveless, above-the-knee women's sheath dress with princess seams front and back and three topstitched diagonal insets on each side of the upper front, meeting in a V below a front yoke. Invisible zipper in the left side seam. Drafted to your own measurements. Recommended fabric: dress fabrics in natural or blended fibres.

Tech. Description

Sleeveless Sheath Dress with Chevron Front Insets

A sleeveless, above-the-knee women's sheath dress with princess seams front and back and three topstitched diagonal insets on each side of the upper front, meeting in a V below a front yoke. Invisible zipper in the left side seam.

When To Wear

  • At the office in spring and summer, or over a fine knit or blouse in cooler months.
  • For daytime events and dinners, with a jacket or cardigan over the shoulders.

Key Design Features

Silhouette: Fitted sheath shaped by curved princess seams running from the armholes to the hem on the front and back.

Length: Just above the knee.

Neckline: Round neckline, finished together with the armholes by a one-piece front facing and a one-piece back facing, both interfaced.

Sleeves: Sleeveless; armholes faced, stitched in two steps (back, then front).

Front: Centre front panel with three insets on each side, laid in diagonal bands that meet in a V. The lowest inset is a folded strip edged 0.2 cm from the fold; the other two are folded up and topstitched 0.2 cm from the seam. A two-piece front yoke is stitched on above them and topstitched.

Closure: Invisible zipper in the upper part of the left side seam; the facing is attached to the zipper tape.

Back: Centre back seam and two princess seams, no back opening.

Finishing: Hem finished, turned up 2 cm and topstitched.

Level Of Difficulty

Intermediate. Layered, topstitched insets that must meet accurately at the centre front, princess seams, an invisible zipper, and an all-in-one neck and armhole facing.

Fabric Recommendations

Dress fabrics in natural or blended fibres.

Additional Supplies

  • Invisible zipper
  • Fusible interfacing (front and back facings)

Cutter's Must

From main fabric:

  • Center Back – 2 pieces
  • Side Back – 2 pieces
  • Side Front – 2 pieces
  • Center Front – 1 piece
  • Front Facing – 1 piece
  • Back Facing – 1 piece
  • Front Yoke – 2 pieces
  • Inset 1 – 2 pieces
  • Inset 2 – 2 pieces
  • Inset 3 – 2 pieces

From fusible interfacing:

  • Back Facing – 1 piece
  • Front Facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the Back Facing and Front Facing.
  2. Stitch the center back seam. Finish the seam allowance and press it to the left. Stitch the back princess seams. Finish the seam allowances and press them towards the center.
  3. Fold Inset 3 in half lengthwise, wrong sides together, and stitch 0.2 cm from the fold. Place Inset 3 on the left side of the Center Front, matching the edges. Place Inset 2 on top, right sides together, and stitch through all layers. Finish the seam allowance. Fold Inset 2 upwards and topstitch 0.2 cm from the seam. Place Inset 1 right side down onto Inset 2. Stitch and finish the seam. Fold Inset 1 upwards and topstitch 0.2 cm from the seam. Sew the right side of the front in the same way. Stitch on the Front Yoke. Finish the seam allowance, and topstitch.
  4. Stitch the front princess seams. Finish the seam allowances and press them towards the side seam.
  5. Finish the left side seams separately, stitch them from the mark downwards, and press the seam allowances open. Insert the invisible zipper. Stitch the right side seam, press the seam allowances towards the back and finish them. Stitch the shoulder seams. Press the seam allowances open.
  6. Stitch the shoulder and right side seams of the facings. Press the seam allowances open. Finish the left side and outer edges of the facing. Place the dress and facing right sides together and stitch the neckline. Clip the seam allowances at the curves, turn the facing out, straighten, and press. Stitch the armhole in two steps: first the back, then the front. Clip the seam allowances at the curves, turn out, and press. Secure the facing to the garment at the right side and center seam allowances. Attach the facing to the zipper tape.
  7. Finish the hem of the dress. Fold the seam allowances inwards and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?