Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4124
#4126

Draped Dolman Blouse with Blouson Waist

Pattern #4125

A hip-length women's top for knit fabric with wide dolman sleeves cut in one with the body, soft pleats at the front shoulders and a waist shirred with elastic thread. A curved overlay piece set into the front waist seam gives the peplum a wrapped look. Drafted to your own measurements. Recommended fabric: fluid jersey with medium stretch, of natural or blended fibres.

Tech. Description

Draped Dolman Blouse with Blouson Waist

A hip-length women's top for knit fabric with wide dolman sleeves cut in one with the body, soft pleats at the front shoulders and a waist shirred with elastic thread. A curved overlay piece set into the front waist seam gives the peplum a wrapped look.

When To Wear

  • In summer with slim trousers, shorts or a straight skirt.
  • For relaxed everyday wear and travel.

Key Design Features

Silhouette: Loose and bloused above the waist, with a short peplum below the shirred waistline.

Length: Hip length.

Neckline: Wide round neckline, turned to the inside and topstitched.

Sleeves: Dolman sleeves cut in one with the front and back; the upper sleeve edges are hemmed separately and joined by hand tacks at the marks.

Front: Upper front cut on the fold with pleats at the shoulders; lower front joined at the waist with a hemmed, curved overlay piece set into the same seam.

Back: One piece cut on the fold.

Waist: Shirred with elastic thread along the front waist seam and along a marked line on the back.

Finishing: Hem overlocked, turned and topstitched.

Level Of Difficulty

Beginner. Four pieces and no fastenings; the main skills are sewing knit fabric and shirring with elastic thread.

Fabric Recommendations

Fluid jersey with medium stretch, of natural or blended fibres.

Additional Supplies

  • Elastic thread

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: hem allowance for the garment and for the lower edge of the front trimming - 1.5 cm; neckline allowance for the back and front - 1.5 cm; allowance for the upper edges of the sleeves - 1.5 cm; other seams 0.7 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need.

  • Back – 1 piece on fold
  • Upper Front – 1 piece on fold
  • Lower Front – 1 piece
  • Front Trimming – 1 piece

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match! Markings are given on the right side. Tip: Knit fabric pieces are stitched with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlock machine.

  1. Fold the lower edge of the Front Trimming inwards and topstitch. Place the Upper Front and Lower Front right sides together, insert the Front Trimming between them, align the edges and stitch. Overlock the allowance.
  2. Stitch the side seams and the lower sleeve seams. Overlock the allowances.
  3. On the front and back, clip the allowance at the shoulder mark. Fold the allowance of the upper sleeve edge inwards, overlock and topstitch.
  4. Lay and secure soft pleats on the front as you like. Stitch the shoulder seams, press the allowances towards the back and overlock.
  5. Overlock the neckline allowances of the back and front, press them to the wrong side and topstitch.
  6. Overlock the lower edge of the garment, press it to the wrong side and topstitch.
  7. On the Back, mark the line of the shirring stitch. Stitch with elastic thread along the back and the front. On the front, stitch along the seam joining the Lower Front.
  8. Join the upper sleeve edges with hand stitches at the marks.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?