Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4125
#4127

Gathered Front Knit Top

Pattern #4126

A hip-length women's top for knit fabric with a crossover V-neck formed by two upper front pieces, gathered into a narrow underbust band. Elbow-length set-in sleeves and a centre back seam. Drafted to your own measurements. Recommended fabric: jersey with medium stretch, of natural or blended fibres.

Tech. Description

Gathered Front Knit Top

A hip-length women's top for knit fabric with a V-neck formed by two upper front pieces that meet at the centre front, gathered into a narrow underbust band. Three-quarter set-in sleeves and a centre back seam.

When To Wear

  • With jeans, trousers or skirts for everyday wear.
  • Under a cardigan or jacket in spring and autumn.

Key Design Features

Silhouette: Fitted at the underbust, slightly flared below to the hip.

Length: Hip length.

Neckline: Deep V-neck formed by the two upper fronts meeting at the centre front, turned to the inside and topstitched.

Front: Two upper front pieces meeting at the centre front, gathered between marks into an underbust band, which is joined to the one-piece lower front.

Sleeves: Set-in three-quarter sleeves, hems turned and topstitched.

Back: Centre back seam.

Finishing: Hem and sleeve hems overlocked, turned and topstitched.

Level Of Difficulty

Beginner. Gathering, a set-in sleeve and turned edges on knit fabric; no fastenings.

Fabric Recommendations

Jersey with medium stretch, of natural or blended fibres.

Additional Supplies

  • Twin needle or coverstitch machine for the hems (recommended)

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, the patterns do not include seam allowances. Seam allowances: Neckline edges of back and front, bottom edge of garment and sleeve hem – 1.5 cm. All other seam allowances – 0.7 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can range from 90 cm to 150 cm) to determine how much material you will need.

  • Back – 2 pieces
  • Front Inset – 1 piece
  • Upper Front – 2 pieces
  • Lower Front – 1 piece
  • Sleeve – 2 pieces

Tip: Knit fabric pieces are stitched with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlocker.

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

  1. Stitch the centre back seam of the Back, press the seam allowances to the left side and overlock.
  2. Stitch the shoulder seams, press the seam allowances towards the back and overlock.
  3. Overlock the neckline seam allowance of the back and front, fold to the wrong side, press and topstitch.
  4. Stitch with loosely tensioned stitches along the bottom edge of each Upper Front. Gather between the marks. Stitch the Upper Fronts to the Front Inset, press the seam allowances and overlock. Stitch the Front Inset to the Lower Front, press the seam allowances upwards and overlock.
  5. Set the Sleeves into the open armholes (before the side seams are sewn), matching the notches. Press the seam allowances and overlock.
  6. Stitch the side seams and sleeve seams in one go. Press the seam allowances and overlock.
  7. Overlock the bottom edge of the garment and the sleeve hems. Fold the seam allowances to the wrong side, press and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?