Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4077
#4079

Knit Mock Wrap Dress with Gathered Front

Pattern #4078

A fitted knee-length women's dress for knit fabric with a crossover V-neck bodice and long sleeves. The gathered upper fronts and the gathered lower front meet at an angled insert cut from suiting fabric at the side waist. Drafted to your own measurements. Recommended fabric: medium or high stretch knit fabric of natural or blended fibres for the dress; suiting fabric of natural or blended fibres for the front insert.

Tech. Description

Knit Mock Wrap Dress with Gathered Front

A fitted knee-length women's dress for knit fabric with a crossover V-neck bodice and long sleeves. The gathered upper fronts and the gathered lower front meet at an angled insert cut from suiting fabric at the side waist.

When To Wear

  • For the office and daytime meetings with plain court shoes.
  • For dinners, theatre and family celebrations in autumn and winter.

Key Design Features

Silhouette: Fitted, close to the body through the waist and hips.

Length: To the knee.

Neckline: V-neck formed by the crossed upper fronts, each finished with its own interfaced facing.

Front: Right and left upper fronts cross over; the right is gathered into the insert and the left gets a small gather at its lower edge. The lower front is gathered into the insert, giving folds that fan across the skirt. The insert is cut from suiting fabric and interfaced. The crossover is sewn in place; there is no opening.

Sleeves: Long one-piece set-in sleeves, sewn with the side seam in one continuous seam.

Back: Centre back seam; back neckline finished with an interfaced facing.

Finishing: Hem and sleeve hems turned up and topstitched.

Level Of Difficulty

Intermediate. Sewing knit fabric, controlled gathering between marks, joining knit and woven pieces at an angled insert, neckline facings on a crossover.

Fabric Recommendations

Medium or high stretch knit fabric of natural or blended fibres for the dress; suiting fabric of natural or blended fibres for the front insert.

Additional Supplies

  • Thin fusible knit interfacing (front insert, neckline facings)

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem allowance for the garment and sleeve hem – 1.5 cm. Other seams 0.7 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!

From knit fabric:

  • Back – 2 pieces
  • Upper Right Front – 1 piece
  • Upper Left Front – 1 piece
  • Lower Front – 1 piece
  • Sleeve – 2 pieces
  • Back Neckline Facing – 1 piece
  • Right Front Neckline Facing – 1 piece
  • Left Front Neckline Facing – 1 piece

From suiting fabric:

  • Front Inset – 1 piece

From fusible interfacing:

  • Front Inset – 1 piece
  • Back Neckline Facing – 1 piece
  • Right Front Neckline Facing – 1 piece
  • Left Front Neckline Facing – 1 piece

Tip: Cut pieces from knit fabrics should be sewn with a special elastic or narrow zigzag stitch. The hem allowance should be topstitched with a twin needle or on a coverstitch machine to maintain elasticity. Alternatively, you can sew the pieces directly on a 3- or 4-thread overlocker.

Sewing Instructions

  1. Fuse interfacing to the designated pieces.
  2. Stitch the center back seam. Overlock the seam allowance and press to the left side.
  3. Along the edge between marks “o” of the upper right front, sew a basting stitch with loosely pulled threads and gather. Overlock the outer edges of the neckline facings. Finish the neckline edge of the upper right front with its facing, turn the facing to the wrong side, and press. Finish the neckline edge of the upper left front with its facing, turn the facing to the wrong side, and press. Place the gathered edge of the upper right front on the upper edge of the front inset from the corner to the mark, lay the upper left front on top, and stitch. Press and overlock the seam allowances. Along the lower edge of the upper left front, sew a basting stitch with loosely pulled threads and create a small gather. Secure the lower edges of the upper front pieces together.
  4. Along the edge between marks “o” of the lower front, sew a basting stitch with loosely pulled threads and gather. Attach the lower front to the front inset, press and overlock the seam allowances. Stitch the upper front to the lower front, press and overlock the seam allowances.
  5. Finish the back neckline with its facing. Fold the shoulder edges right sides together, placing the front shoulder edge between the back and the facing, and stitch. Press and overlock the seam allowances. Turn the facing to the wrong side.
  6. Set the sleeves into the open armholes, matching the marks. Press and overlock the seam allowances.
  7. Stitch the side seams and the sleeve seams in one continuous seam. Press and overlock the seam allowances.
  8. Overlock the bottom edge of the dress and the sleeves. Fold to the wrong side, press, and topstitch.

Features

Order Pattern

Standard Sizes

Pro fitIndividual figure characteristics

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?