Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's above-the-knee dress with a deep V-neck, a high waist inset band, a gathered skirt finished with two layered flounces, and long sleeves gathered into buttoned cuffs. Invisible zipper in the centre back seam. Drafted to your own measurements. Recommended fabric: dress fabrics made of natural or blended fibres.
A women's above-the-knee dress with a deep V-neck, a high waist inset band, a gathered skirt finished with two layered flounces, and long sleeves gathered into buttoned cuffs. Invisible zipper in the centre back seam.
Silhouette: Fitted bodice and inset band, skirt gathered below the band.
Length: Above the knee.
Neckline: Deep V-neck at the front, round neckline at the back. Finished with a facing turned to the inside and topstitched 1 cm from its outer edge.
Sleeves: Long set-in sleeves, gathered at the cap and at the lower edge. A short slit at the sleeve seam, topstitched 0.1 cm from the fold.
Closure: Invisible zipper in the centre back seam; two buttons on each cuff.
Front: Upper front cut on the fold, gathered along its lower edge into the front inset.
Back: Upper back with darts, joined to the back inset; centre back seam.
Waist: Inset band at the front and back, seamed between the bodice and the skirt.
Skirt: Lower front and lower back gathered into the inset band. Two flounces, an upper and a lower one, are laid together and stitched to the skirt in one seam, so the upper flounce sits over the lower one.
Finishing: Flounce hems turned and topstitched; cuffs interfaced, with buttonholes.
Intermediate. Gathering in several seams, an invisible zipper, a V-neck facing, sleeve slits and two-piece cuffs.
Dress fabrics made of natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm. Allowance along the lower edge of the back and front flounces – 1.2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match!
From main fabric:
From fusible interfacing:
First of all, print the paper patterns and lay them out on the fabric width (fabric width may be from 90 cm to 150 cm) in order to determine how much material you will need (do not forget to consider paired and symmetrical pieces).
When stitching pieces, pay attention to the notches – they must match.
#2895
Ruffled V-Neck Button-Front Tiered Dress

#2892
Sweetheart Neck Cap Sleeve Long Mermaid Dress

#2890
Dress with Horizontal Trim Lines
#2899
Fitted Dress with Stand Collar

#2900
Sleeveless Maxi Jeans Dress with Front Zipper
#2902
Pinafore with Patch Pockets

#2885
Colorblock Sheath Dress with Contour Panel Seams

#2904
Sheath Dress with Stand Collar

Minerva Support
Online