Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's semi-fitted short-sleeved blouse in two contrasting colours: the right front and right sleeve are cut from one fabric, the left front and left sleeve from another, joined by a centre front seam. A teardrop cutout below the neckline is crossed by a tab of the right front fixed with one decorative button. Drafted to your own measurements. Recommended fabric: blouse fabrics from natural or blended fibres in two contrasting colours.
A women's semi-fitted short-sleeved blouse in two contrasting colours: the right front and right sleeve are cut from one fabric, the left front and left sleeve from another, joined by a centre front seam. A teardrop cutout below the neckline is crossed by a tab of the right front fixed with one decorative button.
Silhouette: Semi-fitted, shaped by side bust darts on both fronts, pressed upwards.
Length: Hip length, straight hem.
Neckline: Round neckline with an open cutout on the left of the centre front seam; the right front extends into a tab that crosses the cutout and is sewn to the left front with a decorative button. Finished with interfaced front and back facings, overlocked on the outer edge and secured at the shoulder and centre front seams.
Sleeves: Short set-in sleeves, each in the colour of its front.
Closure: No opening; the blouse is pulled on over the head.
Back: Plain back in the main fabric.
Finishing: Shoulder and side seams pressed towards the back and overlocked; 2 cm hems on body and sleeves, overlocked, turned up and topstitched.
Intermediate. A faced neckline with a cutout and a tab, clipped and turned at tight curves and corners, and matching two colours at the centre front seam.
Blouse fabrics from natural or blended fibres in two contrasting colours.
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm. Hem allowance for the bottom edge of the garment – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (don't forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match! Attention! Markings on the patterns are made on the right side!

#2835
Blouse with Decorative Sleeves

#2834
Blouse with Curved Waist Yoke

#2842
Two-Tone V-Neck Cap Sleeve Blouse

#2833
Collared Blouse with Puff Sleeves and Shaped Hem
#2844
Gathered Waist Shirt with Pointed Hem
#2831
Sleeveless Collared Blouse with Gathered Hem
#2845
Puffed Sleeve Blouse with Looped Front Tie
#2829
Sleeveless Draped V-Neck Asymmetric Blouse

Minerva Support
Online