Sleeveless Top Eyelet Lace Trim

Fabric & Materials

Fabric recommendations: cotton blouse fabrics made from natural or blended fibers; eyelet fabric; lace trim 3.5(!) cm wide.

CUTTER'S MUST

IF THE PATTERNS HAVE A DOUBLE CONTOUR, THEN THE PATTERNS INCLUDE SEAM ALLOWANCES. IF THE CONTOUR IS SINGLE, THEN THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: hem allowance – 2 cm. Other allowances - 1.0 cm. ATTENTION! FIRST OF ALL, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90 cm to 150 cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED.

• From main fabric:
  • Back – 1 piece on fold
  • Side front – 2 pieces
• From eyelet fabric:
  • Center front – 1 piece on fold
• Pattern for trim – 1 piece

Sewing Instructions

WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!

1. Overlock the relief edges of the side and center front pieces. Topstitch lace trim onto the center front piece, aligning the longitudinal edge of the trim with the marked relief seam of the center piece. Topstitch lace trim onto the side front piece, aligning the other longitudinal edge of the trim with the marked relief seam of the side piece.
2. Stitch the right shoulder seam, press allowances towards the back and overlock.
3. Cut a bias binding 4 cm wide and a length equal to the neckline length + 4 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the binding with the neckline edge right sides together, leaving tails, and facing. Fold the binding to the wrong side, clip the seams, and topstitch along the fold onto the main piece. Press the seam.
4. Stitch the left shoulder seam, press allowances towards the back and overlock.
5. Cut (if not ready-made) a bias binding 4 cm wide and a length equal to the armhole length + 4 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the binding with the armhole edge right sides together and stitch, fold the binding to the wrong side and topstitch along the fold onto the main piece.
6. Stitch the side seams, press allowances towards the back and overlock.
7. Overlock the bottom edge of the garment, press to the wrong side and topstitch.