Asymmetrical Stand Collar Patch Pocket Coat

Name: Asymmetrical Stand Collar Patch Pocket Coat
Brand: Minerva Patterns
SKU: 2615
Price: 5.00 EUR
Availability: InStock

Pattern #2615

A women's lined coat to the upper thigh with an off-centre front closure on concealed snaps, a stand collar and patch pockets set into the curved front seams. Long one-piece set-in sleeves and shoulder pads. Drafted to your own measurements. Recommended fabric: coating fabrics of natural or blended fibres.

Tech. Description

Asymmetrical Stand Collar Coat

When To Wear

In spring and autumn over dresses, trousers or knitwear.
For the office and everyday wear, over a fitted jacket or a sweater.

Key Design Features

Silhouette: Semi-fitted, shaped by front darts and curved seams between the front and side front.

Length: To the upper thigh.

Collar: Stand collar cut as an outer and inner collar; the outer collar is set into the coat neckline, the inner into the facing, and both are stitched together with the front edges.

Closure: Asymmetric, the right front overlapping the left with the edge off the centre; fastened with 8 sew-on snaps that do not show on the outside.

Front: Darts and a curved seam from the shoulder area down to the side front.

Pockets: Patch pockets with a cut-on facing and pocket lining, placed on the side fronts and caught into the curved seam and side seam, with a slanted opening.

Sleeves: Long, one-piece, set in; the hem allowance is interfaced.

Back: Centre back seam.

Lining: Full lining for the body and sleeves, sewn to the front facings, back neck facing and hems.

Level Of Difficulty

Intermediate. A bagged lining, a two-layer collar set between coat and facing, pockets caught into seams and work with coating fabric.

Fabric Recommendations

Coating fabrics of natural or blended fibres.

Additional Supplies

Lining fabric
Fusible interfacing (front facings, back neck facing, collar, pocket facing, sleeve hem)
8 sew-on snaps
Shoulder pads

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams 1 cm. Hem allowance for coat bottom and sleeve bottom - 3.0 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!

From main fabric:
- Back – 2 pieces
- Front – 2 pieces
- Side front – 2 pieces
- Sleeve – 2 pieces
- Collar – 2 pieces
- Front facing – 2 pieces
- Back neckline facing – 1 piece
- Pocket – 2 pieces
From lining fabric:
- Back – 2 pieces
- Front lining – 2 pieces
- Sleeve – 2 pieces
- Pocket lining – 2 pieces
From fusible interfacing:
- Front facing – 2 pieces
- Back neckline facing - 1 piece
- Collar – 1 piece

Back and front lining pieces are cut by subtracting the back neckline facing and front facing pieces.

Sewing Instructions

Interface the pieces with fusible interfacing. Interface the one-piece pocket facing. Interface the sleeve hem allowance.
Stitch the center back seam. Press allowances open.
Stitch the darts on the front. Trim depths to 1 cm. Slash the dart point allowance, gradually tapering to nothing. Press allowances open.
Stitch the pocket lining to the one-piece pocket facing, press the allowance towards the lining. Press the pocket along the marked line and press. Place the pocket on the side front and secure along the curved, bottom, and side edges.
Stitch the curved seam of the front, clipping the front allowance at the corner. Press allowances open.
Stitch shoulder and side seams, press allowances open. Attach the outer collar to the neckline of the front and back. Press allowances open.
Stitch the sleeve seam. Press allowance open. Press the sleeve hem allowance to the wrong side. Set the sleeve into the armhole. Press allowances. Sew on shoulder pads.
Stitch and press open the shoulder seams of the back neckline facing and front facing. Attach the inner collar to the neckline of the front facing and facing, press allowances open.
Press the bottom edge of the coat to the wrong side. Place the front facing on the right side of the front, right side down, pin and stitch the front edge and collar. Clip allowances at corners. Turn out the front edges, straighten seams, press. Stitch the collar allowances together.
Stitch seams on lining pieces, leaving an opening in the left sleeve seam for subsequent turning. Attach the lining to the front facings, facing, bottom of the garment, and sleeve bottom. Turn the coat right side out, sew up the technical opening.
Sew on snap fasteners according to marks.