Hooded Wrap Coat

Name: Hooded Wrap Coat
Brand: Minerva Patterns
SKU: 2523
Price: 5.00 EUR
Availability: InStock

Pattern #2523

A knee-length women's coat with a hood cut in one with the fronts, a one-button overlapping front with rounded lower front edges, and pockets set into a curved seam across the front. Two-piece sleeves, fully lined. Drafted to your own measurements. Recommended fabric: coating fabrics of natural or blended fibres.

Tech. Description

Hooded Wrap Coat

When To Wear

Autumn and spring outerwear: a hooded coat in coating fabric, worn over dresses or trousers and knitwear.
Cool days when a hood is wanted instead of a hat.

Key Design Features

Silhouette: Fitted through the body with princess seams on the front and back.

Length: About knee length.

Collar: No separate collar: the hood is cut in one with the centre fronts and facings, has a centre seam and is set into the back neckline, where it rolls open like a wide shawl collar.

Sleeves: Full-length two-piece set-in sleeves with an elbow seam and a front seam.

Closure: The right front overlaps the left and fastens with one button and buttonhole at the waist; below it the front edges curve away to the hem.

Pockets: In-seam pockets in the curved seam that joins the upper and lower fronts, with pocket bags cut from lining fabric.

Back: Centre back seam and princess seams.

Finishing: Interfaced centre fronts, front facings and back neck facing; stay tape along the back neckline; thin shoulder pads.

Lining: Full lining cut from the main pieces, with a dart on the front lining, bagged out along the front edges and hood and secured at the front waist seam.

Level Of Difficulty

Intermediate. A hood cut in one with the front, in-seam pockets in a curved panel seam, two-piece set-in sleeves and a bagged-out full lining.

Fabric Recommendations

Coating fabrics of natural or blended fibres.

Additional Supplies

Lining fabric
Fusible interfacing
Fusible stay tape (back neckline)
Thin shoulder pads
1 button

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams 1 cm. Hem and sleeve hem 3 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!

From main fabric:

Center Back – 2 pieces
Side Back – 2 pieces
Side Front – 2 pieces
Center Front – 2 pieces
Center Front Facing – 2 pieces
Back Neckline Facing – 1 piece
Upper Sleeve – 2 pieces
Lower Sleeve – 2 pieces
Lower Front – 2 pieces
Lining fabric pieces are cut according to the main fabric pieces, minus the width of the Back Neckline Facing. From lining fabric:
- Center Back – 2 pieces
- Side Back – 2 pieces
- Side Front – 2 pieces
- Front Lining – 2 pieces
- Upper Sleeve – 2 pieces
- Lower Sleeve – 2 pieces
- Lower Front – 2 pieces
- Pocket Bag – 4 pieces
From fusible interfacing: Center Front, Center Front Facing (except the hood part), Back Neckline Facing.

Sewing Instructions

Fuse interfacing to the designated pieces. Apply an additional fusible stay tape along the back neckline.
Stitch the back princess seams (Center Back to Side Back) and press them open. Stitch the center back seam. Press the seam allowance open.
Stitch the front princess seam (Center Front to Side Front). Press the seam allowances open. Stitch a Pocket Bag to the upper front, starting and ending the stitching exactly at the marked lines of the pocket opening. Press the seam allowances upwards. Stitch the second Pocket Bag to the Lower Front, starting and ending the stitching exactly at the marked attachment line. Stitch the Lower Front to the upper front in two sections: from the front edge to the pocket and from the pocket to the side seam. Press the seam allowances open. Stitch the pocket bags together. Press the seam allowances.
Stitch the hood seam. Press the seam allowance open. Clip the seam allowances at the corner of the shoulder edge. Set the hood into the back neckline. Stitch the shoulder seams of the coat. Press the seam allowances open.
Stitch the side seams of the coat. Press the seam allowances open.
Stitch the elbow seam of the sleeve (Upper Sleeve to Lower Sleeve). Press the elbow seam open, press up the sleeve hem. Stitch the front sleeve seam and press it open.
Set the sleeves into the armholes, matching the notches and easing the sleeve cap at the top. Attach the shoulder pads.
Stitch the shoulder seams of the Back Neckline Facing and the Center Front Facing pieces, clipping the seam allowance at the corner, and press them open. Stitch the hood seam of the Center Front Facing pieces. Stitch the dart on the Front Lining. Assemble the lining pieces in the same way as the main fabric pieces, leaving an opening in the elbow seam of the left sleeve. Stitch the lining to the Back Neckline Facing and the Center Front Facing pieces.
Place the coat and the lining right sides together, pin, matching the outer edges. Stitch along the front edges and the hood. Stitch the lining to the coat hem. Stitch the lining to the sleeve hems. Turn the coat right side out through the opening. Tack the lining to the coat at the front waist seam. Stitch the opening closed.
Make a buttonhole and sew on the button.