Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's mid-calf dress in soft knit fabric with long set-in sleeves. A separate outer front piece is twisted into a knot at the centre and laid over the inner front, forming a deep V-neckline at the front. Drafted to your own measurements. Recommended fabric: for knit fabric only: soft, drapey knit with medium or high stretch, of natural or blended fibres.
A women's mid-calf dress in soft knit fabric with long set-in sleeves. A separate outer front piece is twisted into a knot at the centre and laid over the inner front, forming a deep V-neckline at the front.
Silhouette: Close-fitting, straight to the hem, shaped with bust darts on the inner front.
Length: Mid-calf.
Neckline: The outer front forms a deep V; below it the inner front has its own round neckline. Both edges are turned in and topstitched.
Front: The inner front is cut on the fold. The outer front, with turned and topstitched neck and lower edges, is twisted to form a knot at the centre and basted to the inner front at the shoulders, side seams and armholes; it ends under the bust.
Sleeves: Long, one-piece, set-in.
Back: Two pieces with a centre back seam; round back neckline turned in and topstitched.
Closure: None; the dress pulls on over the head.
Finishing: Hem and sleeve hems turned up 1.5 cm and stitched with a twin needle or coverstitch.
Beginner. Few pieces and simple seams; the only special step is twisting the outer front into the knot before basting it to the inner front.
For knit fabric only: soft, drapey knit with medium or high stretch, of natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, the patterns are without seam allowances. Seam allowances: hem allowance, sleeve hem allowance, back neckline allowances, inner and outer front allowances, outer front bottom allowance – 1.5 cm, other seams 1.0 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!
Tip: Knit fabric pieces are stitched with a special elastic or narrow zigzag stitch. When serging, trim allowances to 0.8 cm. The hem allowance is stitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlocker.

#2516
Two Tone Midi Dress
#2515
Sheath Dress with Asymmetrical Front Pleats
#2522
Twisted Neck Long Sleeve Sheath Dress
#2512
Dress with Decorative Lapels

#2524
Fit and Flare Dress with Chiffon Sleeve Insets
#2526
A-line Boat Neck Dress with Shoulder Bow
#2509
Short Sleeve Shift Dress V-Seam
#2508
Fitted Dress Coat Notched Contrast Lapel

Minerva Support
Online