Pattern

Fabric & Materials

FABRIC RECOMMENDATIONS: medium stretch knit fabric made of natural or blended fibers. YOU ALSO NEED: a concealed zipper.

CUTTER'S MUST

IF THE PATTERNS HAVE A DOUBLE CONTOUR, SEAM ALLOWANCES ARE INCLUDED. IF THE CONTOUR IS SINGLE, SEAM ALLOWANCES ARE NOT INCLUDED. SEAM ALLOWANCES: all seams 1 cm; hem allowance – 1.5 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90cm to 150cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (do not forget to account for paired and symmetrical pieces). WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!

• From main fabric:
  • Upper back part - 2 pieces
  • Middle back part - 2 pieces
  • Lower back part - 2 pieces
  • Upper front part - 1 piece on fold
  • Middle front part - 1 piece on fold
  • Lower front part - 2 pieces

Tip: Knit fabric pieces are stitched with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlocker.

Sewing Instructions

1. Stitch the darts on the front piece, press the dart excess upwards.
2. Stitch the middle and lower back parts, clipping the seam allowance of the middle part at the corner. Press and overcast the seam allowances. Stitch the middle and lower front parts, clipping the seam allowance of the middle part at the corner. Press and overcast the seam allowances.
3. Stitch the upper and lower back parts, press the seam allowances upwards and overcast. Stitch the upper and lower front parts, press the seam allowances upwards and overcast.
4. Overcast the center back edges separately. Stitch the center back seam from the zipper mark to the bottom. Press the seam allowance open. Insert the concealed zipper.
5. Stitch the shoulder seams, press the seam allowances towards the back and overcast.
6. Cut (or use ready-made) bias binding 4 cm wide and a length equal to the neckline length of the back and front + 4 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the binding along the neckline edge, right side facing, and stitch. Fold the binding to the wrong side, clip the seams, and topstitch along the fold onto the main piece. Press the seam.
7. Cut (or use ready-made) bias binding 4 cm wide and a length equal to the armhole length of the back and front + 4 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the binding along the armhole edge, right side facing, and stitch. Fold the binding to the wrong side, clip the seams, and topstitch along the fold onto the main piece. Press the seam.
8. Stitch the side seams, press the seam allowances towards the back and overcast.
9. Overcast the hem allowance of the garment, press to the wrong side and topstitch.