Pattern

Fabric & Materials

Fabric recommendations: medium to low stretch knit fabric made from natural or blended fibers, non-fraying elastic lace. For finishing: LACE TRIM 1.5-2 cm wide is needed to cover seams. Also, SATIN BIAS BINDING is needed for the "BONING".

CUTTER'S MUST

IF THE PATTERNS HAVE A DOUBLE CONTOUR, THEY INCLUDE SEAM ALLOWANCES. IF THE CONTOUR IS SINGLE, THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: all seams 1 cm. Bottom hem allowance – 2 cm. Bottom yoke allowance – 0 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90cm to 150cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (do not forget to account for paired and symmetrical pieces).

• From main fabric:
  • Back – 1 piece on fold
  • Front - 1 piece on fold
• From main fabric 1:
  • Yoke – 1 piece on fold

Sewing Instructions

WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!

1. Finish the top edge of the front, fold inwards, and topstitch. Place the yoke right side up on the front and align with the lower marked line. Topstitch from the right side along the upper marked line.
2. Stitch the right shoulder seam. Finish the allowance and press towards the back.
3. Cut (if not ready-made) a bias binding 4 cm wide and a length equal to the neckline length + 4 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the binding with the neckline edge right side to right side and stitch. Clip the allowances. Fold the binding to the wrong side and topstitch along the fold to the main piece. Press the seam.
4. Stitch the left shoulder seam. Finish the allowance and press towards the back.
5. Cut (if not ready-made) a bias binding 4 cm wide and a length equal to the armhole length + 4 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the binding with the armhole edge right side to right side and stitch. Clip the allowances. Fold the binding to the wrong side and topstitch along the fold to the main piece. Press the seam.
6. Stitch the side seams, press allowances towards the back and finish.
7. Finish the bottom edge of the garment, press to the wrong side, and topstitch.