Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's hip-length top for knit fabric with a henley placket closed by four buttons, a narrow stand collar and short set-in sleeves held rolled up by a buttoned tab. Drafted to your own measurements. Recommended fabric: knit fabric with medium to high stretch, from natural or blended fibres.
A women's hip-length top for knit fabric with a henley placket closed by four buttons, a narrow stand collar and short set-in sleeves held rolled up by a buttoned tab.
Silhouette: Straight, slightly fitted, for knits with medium to high stretch.
Length: Hip length.
Collar: Two-layer stand collar, interfaced, ending at the placket opening.
Front: Front cut on the fold with a notched opening finished by a two-piece placket; four buttons on the placket.
Sleeves: Short set-in sleeves; a folded tab with a buttonhole is topstitched to the inside of each sleeve and buttons onto the outside to hold the roll.
Back: One piece cut on the fold.
Finishing: Seams sewn with a stretch or narrow zigzag stitch or on a 3- or 4-thread overlocker; hem and sleeve hems turned up 1.5 cm and topstitched with a twin needle.
Intermediate. A placket opening cut into the corners, a stand collar on a knit neckline and buttonholes on knit fabric.
Knit fabric with medium to high stretch, from natural or blended fibres.
From main fabric:
From fusible interfacing:
Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlock machine.

Minerva Support
Online