Pleated Front Blouse with Cuffed Sleeves

Fabric & Materials

Fabric recommendations: blouse fabrics made of natural or blended fibers. ALSO NEEDED: 1 button; fusible interfacing.

CUTTER'S MUST

IF THE PATTERNS HAVE A DOUBLE CONTOUR, SEAM ALLOWANCES ARE INCLUDED. IF THE CONTOUR IS SINGLE, SEAM ALLOWANCES ARE NOT INCLUDED. SEAM ALLOWANCES: Hem allowance – 2 cm; other seams – 1 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90 cm to 150 cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (don't forget to account for paired and symmetrical pieces). WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!

• From main fabric:
  • Back yoke - 2 pieces
  • Back - 1 piece on fold
  • Front - 1 piece on fold
  • Front yoke - 1 piece on fold
  • Cuff – 2 pieces
• From fusible interfacing:
  • Cuff — 2 pieces

Sewing Instructions

1. Interface the cuffs with fusible interfacing.
2. Along the upper edge of the front, lay and secure the pleats. Depths are directed towards the center. Stitch the front yoke to the front. Press seam allowances upwards and overcast.
3. Overcast the center edges of the back yoke. Press seam allowances to the wrong side and topstitch. Stitch the back yokes to the back. Overcast seam allowances and press upwards.
4. Stitch the right shoulder seam, simultaneously with the sleeve edge. Overcast seam allowance and press towards the back.
5. Cut a bias strip 2.5 cm wide and 5 cm long for the loop. Fold the strip lengthwise in half, right sides together, and stitch 0.3 cm from the fold. Trim seam allowances close to the stitching, turn the strip right side out, and straighten the rouleau. Adjust the loop length. Sew the loop to the yoke.
6. Cut a bias strip 4 cm wide and a length equal to the neckline length + 4 cm. Fold the bias binding lengthwise in half, wrong sides together, and press. Place the binding along the neckline edge, right sides together, extending the ends, and stitch. Fold the binding to the wrong side, clip seam allowances, and topstitch along the fold onto the main piece. Press the seam.
7. Stitch the side and left shoulder seams, simultaneously with the sleeve edge. Overcast seam allowances and press towards the back.
8. Stitch the cuff into a loop, press seam allowances open. Fold the cuff lengthwise in half and press. Stitch the outer side of the cuff to the sleeve. Fold the seam allowance of the inner part inwards and topstitch into the attaching seam.
9. Overcast the bottom edge of the garment, fold inwards, and topstitch.
10. Sew the button onto the yoke.