Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#2104
#2106

Sleeveless Gathered V-Neck Placket Blouse

Pattern #2105

A women's sleeveless blouse cut straight to the hip, with a split V-neckline, gathers on the front neckline and a double-layer placket stitched over the centre front from the V down to the hem. Neckline and armholes are bound with bias binding. Drafted to your own measurements. Recommended fabric: blouse fabrics with good drape from natural or blended fibres.

Tech. Description

Gathered V-Neck Blouse

A women's sleeveless blouse cut straight to the hip, with a split V-neckline, gathers on the front neckline and a double-layer placket stitched over the centre front from the V down to the hem. Neckline and armholes are bound with bias binding.

When To Wear

  • In summer, on its own with trousers, shorts or a skirt.
  • Under a jacket or cardigan for the office.

Key Design Features

Silhouette: Loose, straight body with no darts.

Length: Hip length, with a hem that curves up at the side seams.

Neckline: Round neckline with a narrow V slit at the centre front. Gathers on the front neckline on each side of the V, set to length with a neckline shaping template. The neckline edge is bound with bias binding, which holds the gathers.

Front: Cut in one piece on the fold. The placket is made of two pairs of pieces, stitched together along the centre and then stitched to the V opening and turned out; it lies on the front from the neckline to the hem and is topstitched along its centre seam, with the free edges tacked by hand from the wrong side.

Sleeves: Sleeveless; armholes finished with bias binding.

Back: One piece cut on the fold, with no centre back seam.

Finishing: Hem finished, turned once and topstitched. No seam allowance on the neckline or armholes, which are bound.

Level Of Difficulty

Intermediate. Gathering to a template, bias-bound edges and a placket stitched to a V opening with a clipped corner.

Fabric Recommendations

Blouse fabrics with good drape from natural or blended fibres.

Additional Supplies

  • Bias binding (the approximate length is marked on the front pattern piece)

Cutter's Must

When stitching pieces, pay attention to the notches - they must match!

  • From main fabric:
    • Back - 1 piece on fold
    • Front - 1 piece on fold
    • Placket – 4 pieces
  • Additional patterns:
    • Neckline shaping pattern – 1 piece

Sewing Instructions

  1. Along the front neckline between the marks, stitch with a loosened top thread and gather, referring to the shaping pattern.
  2. Stitch shoulder seams. Finish allowances and press towards the back. Bind the neckline edge with bias binding up to the outermost mark, securing the gathering.
  3. Fold plackets in pairs right sides together and stitch along the outer edge. Clip allowance at the corner and turn right side out. Press plackets. Stitch plackets along the vertical edge.
  4. Place the front piece right side up on the finished placket, aligning the center line, and stitch the upper corner and neckline opening. Clip allowances at the mark. Turn the placket to the right side and press. Topstitch the placket to the front in the placket stitching seam. Secure the loose parts of the placket from the wrong side with hidden stitches in two or three places.
  5. Bind armhole edges with bias binding.
  6. Stitch side seams, press allowances towards the back and finish.
  7. Finish the bottom edge of the garment, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?