Fabric & Materials
Fabric recommendations: HEAVY SATIN. Also needed: 20 CM ZIPPER; FUSIBLE INTERFACING; LINING FABRIC.
CUTTER'S MUST
If the patterns have a double contour, they include SEAM ALLOWANCES. If the contour is single, the patterns do not include SEAM ALLOWANCES. SEAM ALLOWANCES: Seam allowance for the center back seam (FOR ZIPPER INSERTION), for the bottom edge - 2 cm. Other seams - 1 cm. ATTENTION! First, print out the paper patterns and lay them out on the fabric width (fabric width should be at least 140 cm) to determine how much material you will need.
- From SATIN:
- All SKIRT pieces
- All FACING pieces
- From FUSIBLE INTERFACING:
- All FACING pieces
- From LINING:
- All LINING pieces
Sewing Instructions
When stitching pieces, pay attention to the NOTCHES - they must match! Try to observe the GRAIN LINE direction.
- Zipper in the center back seam.
- The bottom of the skirt is hemmed by hand (2cm).
- The facing, reinforced with fusible interfacing, is stitched onto the skirt lining, and then the top edge of the skirt is finished.
- The skirt gusset is inserted into the clean edge between the main fabric and the lining fabric along the center back seam.
