CUTTER'S MUST
- From main fabric:
- 1. Upper BACK PANEL - 2 QTY
- 2. Lower BACK PANEL - 2 QTY
- 3. Upper FRONT PANEL – 1 QTY
- 4. Lower FRONT PANEL - 1 QTY
- 5. COLLAR - 1 QTY
- 6. SLEEVE - 2 QTY
Sewing Instructions
- Stitch darts on BACK PANEL pieces. Press darts towards the center seam. Stitch upper and lower BACK PANEL pieces. Press seam downwards and serge.
- On the left lower BACK PANEL, trim 5 cm along the vertical slit edge. On both lower BACK PANEL pieces, fuse the slit from the wrong side with FUSIBLE INTERFACING. On the right side, mark the center seam line (slit fold line). Press the left part along the slit fold line; on the right part, press only the right slit SEAM ALLOWANCE (6 cm) to the wrong side. Align the pieces along the center seam and secure at the upper slit edge. Serge the center BACK PANEL edge separately on each piece. Serge the slit SEAM ALLOWANCES. Stitch the center BACK PANEL edge from the ZIPPER NOTCH to the slit corner. Clip the slit seam allowance corner on the right part. Press open the center seam SEAM ALLOWANCES, press the slit SEAM ALLOWANCES and secure them with machine stitching. Insert the ZIPPER from the upper edge to the NOTCH.
- Stitch darts on FRONT PANEL pieces. Press darts towards the center of the FRONT PANEL. Stitch upper and lower FRONT PANEL pieces. Press seam downwards and serge.
- Stitch side and shoulder edges, press SEAM ALLOWANCES towards the BACK PANEL and serge.
- Fold the COLLAR in half lengthwise, right sides together, and stitch the ends. Start and end stitching precisely at the marked COLLAR attachment seam line. Turn the finished COLLAR right side out, shape the corners, and press. Attach the outer COLLAR edge to the neckline, press the seam towards the COLLAR. Turn under the open inner COLLAR edge and topstitch into the COLLAR attachment seam.
- Stitch darts on the SLEEVE cap. Press darts towards the back. Stitch the SLEEVE edge. Press the seam and serge. Set in the SLEEVES into the armholes, matching NOTCHES. Press the seam and serge.
- Serge the hem allowance of the dress and SLEEVE hem, press to the wrong side, and hem with blind stitches. The dress is recommended to be worn with a belt.
